Transmission Earth End Earthing Clamps 132kV 275kV 400kV

Transmission Earth End Earthing Clamps 132kV 275kV 400kV

Transmission Earth End Earthing Clamps 132kV 275kV 400kV

PB Weir transmission earth end earthing clamps are suitable for the temporary earthing of transmission line conductors and overhead power lines within the range 132kV, 275kV and 400kV.

PB Weir CE10/A2 tower clamp is for direct application by hand to steelwork and the large thumbscrew of the device has a captive hardened steel tip which penetrates through painted, weathered or non-conductive surfaces and indents into the steel work, ensuring a strong connection to earth potential.

The PB Weir CE18/A clamp is for earthing the line conductor over the tension set insulators to tower arm coupling during maintenance. It bolts to the coupling through the clearance hole for the arcing horn bolt which is removed prior to earthing.

Transmission Earth End Earthing Clamps 132kV 275kV 400kV Benefits

  • Solid construction to give extended service
  • Proven service record used by ESI for over 40 years
  • Lightweight and good corrosion resistance
  • Short circuit of continuous current tested
Transmission Earth End Earthing Clamps 132kV 275kV 400kV

A full range of Transmission Line Earthing Equipment are available for use with transmission earth end earthing clamps

Tools For Overhead Line Transmission Conductors

T&D distribute the Ripley range of Utility Tools for stripping, cutting and preparing high voltage transmission and distribution cables prior to jointing, splicing and stringing – see also the Cembre range for battery and hydraulic cutting tools.