Alroc MF3NP/60 Tool – Strip Outer Sheath, Bonded Semicon & Insulation up to 58mm Diameter

Alroc MF3NP/60

Stocked & Supplied by Thorne & Derrick | Tools for Jointing, Termination & Preparation of MV HV Cables

Multifunction Tools

ALROC MF3NP/60

MF3NP/60 multifunction cable tools are manufactured by Alroc and used by MV-HV jointers to remove the outer sheath (PE-PVC-PR) with a straight and neat cut, remove the bonded semiconductor with a chamfer and leave a minimum remaining length of 40 mm / 1.57 inch and also remove the insulation with a straight and neat cut. The pitch of the Alroc MF3NP/60 Cable Jointing & Preparation Tool can also be tuned.

Please note: Silicon is required for the removal of bonded semiconductor.

Alroc - Cable Jointing Tools

Alroc MF3NP/60 – Technical Specification

Cable Tool Part Number	Diameter	Tool Capacity			MF3NP/60 Dimensions
Cable Tool Part Number	Diameter	Non peelable semiconductor screen thickness capacity	Insulation thickness capacity	Chamfer angle on the non peelable semiconductor screen	Length	Width	Height
MF3NP/60	16 – 58 mm 0,630 – 2,283 in	0.4 – 1.4 mm 0.026 – .06 inch	7 mm 0.28 inch	14.5°	185 mm 7,283 in	90 mm 3,543 in	120 mm 4,724 in

SPARE TOOL PARTS FOR USE WITH ALROC MF3NP/60

LMF2 – Spare blade for primary insulation
PCR – Quick set up right angled 45° handle
196855 – Straight handle M10
108098 – Clamping knob for blade
LASCR1 – Spare blade for bonded semiconductor

Associated Preparation & Jointing Tools for MV HV Cables

GRI-RTE – Scraper for residues of bonded semiconductor screen with protective case
LHA – Tool to chamfer insulation

Alroc MF2 40 Tool – Strip Outer Sheath & Insulation up to 40mm Diameter