Cable Joints | Cold Shrink Joints MV HV Straight Cable Joint

Published 13 Mar 2018

Cold Shrink Joints

Cable Terminations | Heat Shrink | Cold Shrink | Push-On | MV HV Medium & High Voltage

  • Category: Nexans Power Cable Accessories Videos
  • Product: Cable Joints
  • Type: Cold Shrink Cable Joints
  • Cable Joint Type: Straight Joints
  • Voltage Category: MV Medium Voltage | HV High Voltage
  • Voltage Classes: 11kV/12kV | 24kV
  • Manufacturer: Nexans
  • Uploaded By Chris Dodds – Thorne & Derrick Sales & Marketing Manager

Cold Shrink Joints

Nexans 24CSJ type MV cable joints are straight cold shrink joints for jointing single core polymeric insulated medium voltage cables to be laid in air on cable containment or directly buried into a cable trench.

Nexans 24CSJ cold shrink cable joints are fully screened and fully submersible for MV-HV cable jointing in industrial or hazardous area locations.

Nexans cable joints are available in both heat shrink and cold shrink technologies for jointing and repairing medium/high voltage cables up to 33kV – single core and 3 core cable joints kits are available for MV-HV cables with paper or polymeric insulation, copper wire or copper tape screen and armoured/unarmoured construction.

The Cold Shrink Joints accommodate both copper or aluminium conductors and accept shearbolt cable connectors or crimp connectors.

MV HV Cold Shrink Single Core Straight Cable Joints

Up To 24kV

The following table enables the selection of Nexans 24CSJ cold shrink cable joints for 11kV and 24kV voltage cables:

Nexans Cold Shrink Cable Joint Type L (mm) Diameter Over Outer Sheath (mm) Diameter Over Core Insulation (mm) Conductor Sizes For 11kV 12kV (sqmm)
(For Information Only)
Conductor Sizes For 24kV (sqmm) (For Information Only)
Max Min Max Min Max Min Max
Nexans Joint 24CSJ-1 750mm 46mm 18mm 33mm 95sqmm 300sqmm 35sqmm 185sqmm
Nexans Joint 24CSJ-2 750mm 46mm 23mm 38mm 185sqmm 300sqmm 95sqmm 300sqmm
Nexans Joint 24CSJ-3 850mm 57mm 30mm 54mm 400sqmm 630sqmm 240sqmm 630sqmm

 

More Cable Jointing Videos | Heat Shrink Terminations | Heat Shrink Joints Transition | Heat Shrink Joints Straight | Separable Connectors | Cold Shrink Terminations

THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

Euromold

The Euromold range of Separable Connectors are suitable for the termination of power cables onto all MV-HV bushing interfaces:

Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs - Interface A Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface B Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface C Compact Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface C Symmetrical Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface D Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface E

Further Reading