3M 96-EP830-2 Cable Termination Cold Shrink 66kV High Voltage

66kV Cable Terminations 3M QTEN Cold Shrink High Voltage Cable Terminations HV

3M 96-EP830-2

66kV Cable Terminations

Suit Cable Type: 66kV Polymeric Insulation Single Core with CWS Copper Wire Screen Inverted (not suitable for CTS Copper Tape Screen Cables)

3M 96-EP830-2 cold shrink high voltage cable terminations are part of the 3M QTEN range of 66kV Cable Terminations – these termination kits have a voltage class of 72.5kV meeting and exceeding the requirements of the CENELEC HD 629.1 European standard as well as IEC 60840.

3M 96-EP Kit Reference – 96EP830-2
Diameter over Cable Jacket (mm) – 115mm
Diameter over Primary Insulation (mm) – 51.1-87.0mm
Cross Section Guide (sqmm) 66/69 (72.5)kV – 630 – 2000sqmm
Cable Lug Dimensions max (mm) – 110mm
Cold Shrink Technology

Conductors can be terminated using Pfisterer Sicon type mechanical shearbolt cable lugs which are approved and compatible with 3M Cold Shrink Terminations.

Performance Tests

The 3M 96EP830-2 single core termination meets and exceeds the requirements of IEC standard 60840 04/2004. Refer to Test Reports 003257 & 2009-124.

3M 96EP830-2 Physical and Electrical Properties

3M QTEN Cold Shrink Termination kit can be used on cables with a rated operating temperature up to 105˚C, and an emergency overload rating of 140˚C. A termination constructed from this kit is rated for 72.5kV Umax and meets or exceeds the requirements of IEC 60840. The current rating of the cable termination meets or exceeds the current rating for the cables on which it is installed. BIL rating is 350 kV.

Typical Dimensions (Installed Termination)

Installed Termination of 3M 96EP830-2 is 850 to 900mm in length. (Dependant on Cable Cross Section).

Creepage Distance

The designed specific creepage distance of the Cold Shrink termination is 1750mm.

Storage

The shelf life of 3M 96EP830-2 termination is specified as 3 years.
Temperature: – 40°C to +50°C (short term peaks at 60°C max.)

Also: 3M Cold Shrink Cable Terminations for medium and high voltage 11kV and 33kV cable terminating.

➡ Should you require customer service or technical support on the selection or specification of LV MV HV Cable Accessories please contact us – view the full range of 3M Standard Cold Shrink Cable Joints.

♦ For LV Low Voltage Cables | Cold Shrink Cable Joints | Cold Shrink Cable Abandonment | Cold Shrink Tubes