Alroc MF3NP/60 Tool – Strip Outer Sheath, Bonded Semicon & Insulation up to 58mm Diameter
Alroc MF3NP/60 cable tools are used by MV-HV jointers to remove the outer sheath and insulation to prepare the cable ready for the installation of joints, terminations or connectors.
The MF3NP/60 allows the user to remove the outer sheath (PE-PVC-PR) with a straight and neat cut, remove the bonded semiconductor with a chamfer and a minimum remaining length of semiconductor of 40 mm / 1.57 inch and remove the insulation with a straight and neat cut
Silicon is required for the removal of bonded semiconductor.
Tuning of the pitch of the tool embedded wear pads to protect the tool from the contact with the outer sheath.
Alroc MF3NP/60 – Technical Specification
|Cable Tool Part Number||Diameter||Tool Capacity||Dimensions||Packaging|
|Non peelable semiconductor screen thickness capacity||Insulation thickness capacity||Chamfer angle on the non peelable semiconductor screen||Length||Width||Height|
|MF3NP/40||16 – 40 mm 0,630 – 1,575 in||0.4 – 1.4 mm / 0.026 – .06 inch||7 mm / 0.28 inch||14.5°||165 mm 6,496 in||80 mm 3,150 in||100 mm 3,937 in||None|
|MF3NP/60||16 – 58 mm 0,630 – 2,283 in||0.4 – 1.4 mm / 0.026 – .06 inch||7 mm / 0.28 inch||14.5°||185 mm 7,283 in||90 mm 3,543 in||120 mm 4,724 in||None|
MV HV EHV
- MV Medium Voltage Cables 11kV 33kV
- HV High Voltage Cables 66kV
- EHV Extra High Voltage Transmission & Distribution Cables 132kV 245kV 400kV
➡ For further information about Alroc cable tools for removing cable screen from MV-HV cables please see below.