BS6622 – 6.35/11kV Single Core AWA Cable

11kV 33kV Cables

Single Core Awa Cable | 11kV Voltage


BS6622 Cable Description: Single core armoured cable with XLPE insulation. Rated voltage 6.35/11 KV, manufactured by Nexans

International Standards:  IEC 60502-2

National Standards:  BS 6622

Description: BS6622 11kV medium voltage electric power cable with copper conductors, semi-conductive conductor screen, XLPE insulation, semi-conductive insulation screen, copper tape metallic screen, PVC bedding, Aluminium wire armour (AWA) and PVC outer sheath. The cable is suitable for rated voltage 6/10KV according to IEC 60502-2.

Application: Suitable for medium voltage energy networks where mechanical stresses are expected, underground installation or in cable duct

➡ Note: the cable is suitable for rated voltage 6/10 KV (Um=12kV) according to IEC 60502-2.

Nexans Joints Connectors Terminations

Bushings | Surge Arresters | Terminations Heat Shrink & Cold Shrink | Connectors

BS6622 | 11KV Single CORE CABLE


BS6622 - 6.35/11kV Single Core AWA Cable

1. Copper Conductors

2. Semi-conductive Conductor Screen

3. XLPE Cable Insulation

4. Semi-conductive Insulation Screen

5. Metallic Copper Tape Screen

6. PVC Cable Bedding

7. Aluminium Wires Armour (AWA)

8. PVC Outer Cable Sheath

♦ See Cable Jointing Tools to enable cable sheath, semi-con screen and insulation removal of Nexans BS6622 medium voltage power cables.

High Voltage Cables

Nexans manufacture an extensive range of MV & HV Cables, 11kV, 33V & 66kV

➡ See HV Cable Joints, Terminations & Connectors to enable the installation of BS6622 6.35/11kV Single Core AWA Cable – for terminatingHeat Shrink Cable Terminations medium voltage cables into MV-HV gas insulated switchgear, transformers and electrical equipment with outer cone type bushings please see Nexans Euromold connectors  slip-on, heat shrink terminations and cold shrink cable joints from 11kV-33kV (42kV) also available for MV-HV cables.

Nexans Euromold Connectors

Nexans Euromold screened separable connectors, elbows and Tee-connectors terminate high voltage cables with polymeric insulation (XLPE & EPR) onto switchgear and transformer bushings.

Data Sheets