Euromold 151SP Straight Plug 11kV 24kV
Euromold 151SP is a straight plug specified to terminate and connect medium/high voltage cables and can be utilised with MV-HV elbow, straight and branch connectors in the following voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
The Euromold 151SP straight plug with 200A current rating is designed for Interface A and covers voltages from 12kV to 24kV with a maximum conductor size of 95sqmm.
Euromold 151SP plug-in elbow connectors can be supplied as a straight connector (152SR) and with surge arresters (156SA) and plug-in type epoxy bushings – all suitable for use with Interface A type bushings on SF6 gas-insulated switchgear.
Separable Straight Plug designed to connect polymeric insulated cable to cable where the plug combines with Euromold Interface A Elbows, Straight and Branch Joint Connectors.
Designed to connect polymeric insulated cables with a copper wire screen but can be used on wire armoured, copper tape screen cables with the use of additional screen earth kits and accessories.
Connector accessories include: dead-end receptacle, dead-end plug, stand-off plug and earthing plug for type A interfaces.
- Manufacturer – Nexans Euromold
- MV HV Equipment Bushing Connector – Interface A
- Maximum Operating Current – 200A (Amps)
- Voltage Classes – 12kV 24kV Maximum
- Terminate & Connect Cables – Polymeric XLPE EPR
- Conductor Cross Section Sizes – 16-95sqmm
- Applications – MV HV Switchgear, Transformers, Motors
âž¡ See complete range of Nexans Euromold ConnectorsÂ
EUROMOLD 151SP Specification
| Euromold Separable connector type |
Voltage Um (kV) |
Current Ir (A) | Conductor sizes (sqmm) | |
| min | max | |||
| 151SP | 11kV 12kV | 200 Amps | 16 | 95 |
| K151SP | 24kV | 200 Amps | 16 | 95 |
Euromold 151SP Straight Plug – Design
Separable connector comprising:
- Conductive EPDM insert
- Conductive EPDM jacket
- Insulating EPDM layer moulded between the insert and the jacket
- Type A – 250 A Interface as described by CENELEC EN 50180 and 50181
- Conductor connector
The thick conductive EPDM jacket provides a safe to touch screen which ensures safety for personnel, cables and electrical equipment in medium/high voltage installations.
Euromold 151SP Selection Table
For Screened MV HV Straight Plug
Select the Euromold ordering part number which positions the cable most central to the minimum and maximum core insulation diameter, then substitute X using the table below according to the conductor size (sqmm) and type (copper or aluminium). Order Euromold MT connector kit to enable termination of copper tape screened MV-HV cables in voltage range 11kV (12kV) to 24kV – suitable for copper wire screened cables. Add a ‘K’ for use up to 24 kV.
The complete Euromold 151SP elbow connector kit comprises the following components –Â cable lubricant, wipers, installation instructions and crimp chart.
Kit Contents for Euromold 151SP Straight Plug
| Euromold 151SP Part Number |
Dia. over core insulation (mm) | |
| min | max | |
| 151SP-A-X+11TL-FA/FAB | 14.6 | 18.7 |
| 151SP-B-X+11TL-FB/FG | 17.2 | 21.2 |
| 151SP-B-X+11TL-GA/GAB | 19.7 | 23.0 |
| 151SP-C-X+11TL-GB/GH | 22.2 | 26.4 |
| Conductor sizes (sqmm) |
Aluminium Cable | Copper Cable | |
| DIN Hexagonal Crimp | Deep Indent Crimp | DIN Hexagonal Crimp | |
| 16sqmm | – | – | 16(K)M-11-2 |
| 25sqmm | 25(K)M-12-2 | 25KM-12-1 | 25(K)M-11-2 |
| 35sqmm | 35(K)M-12-2 | 35KM-12-1 | 35(K)M-11-2 |
| 50sqmm | 50(K)M-12-2 | 50(K)M-12-1 | 50(K)M-11-2 |
| 70sqmm | 70(K)M-12-2 | 70(K)M-12-1 | 70(K)M-11-2 |
| 95sqmm | 95(K)M-12-2 | 95(K)M-12-1 | 95(K)M-11-2 |
Euromold MV HV | Cable Terminations, Connectors, Elbows & Joints
Euromold | Connect | Joint | Terminate MV HV Cables – view our complete range of HV Joints & Terminations in heat shrink, cold shrink, push-on and plug-in versions.
Nexans Euromold Connectors Interface ADownload
