Euromold PITO-E Plug-In Cable Termination 11kV 24kV
Euromold PITO-E is a plug-in cable termination specified to terminate and connect medium/high voltage cables to MV-HV overhead lines or busbars to equipment in the following voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
Euromold PITO-E is suitable for indoor and outdoor use for medium polluted atmosphere and is designed to connect overhead lines or bus bars to equipment.
Euromold PITO-E plug-in cable termination can be supplied with straight connectors (152SR) and with surge arresters (156SA) or plug-in type epoxy bushings – all suitable for use with Interface A type bushings on SF6 gas-insulated switchgear.
The plug-in termination is a moulded epoxy insulated part and meets IEC 60137.
Connector accessories include: dead-end receptacle, dead-end plug, stand-off plug and earthing plug for type A interfaces.
- MV HV Cable Termination Type – Interface A
- Maximum Operating Current – 250A (Amps)
- Voltage Classes – 12kV 24kV Maximum
- Terminate & Connect Cables – Polymeric XLPE EPR
- Applications – Indoor & Outdoor Medium/High Voltage Electrical Equipment
- Also Cold Shrink Terminations | Heat Shrink Terminations
➡ See complete range of Nexans Euromold Connectors
EUROMOLD PITO-E cable termination Specification
|Euromold plug-in termination type||Voltage
|Current Ir (A)||Creepage Distance A-B|
|PITO-E Cable Termination||11kV 12kV||250 Amps||510|
|PITO-E Cable Termination||24kV||250 Amps||510|
To order the plug-in termination for 11kV/12kV or 24kV, specify Nexans PITO-E. The kit includes the bail restraint and 2 brass nuts. For further MV-HV power cable connectors and terminations, see plug-in terminations for use with 33kV gas insulated switchgear and inner cone bushings.
Euromold | Connect | Joint | Terminate MV HV Cables – view our complete range of HV Joints & Terminations in heat shrink, cold shrink, push-on and plug-in versions.