Cable Jointers Tents & Umbrellas

Jointers Tents
âž¡ Cable jointers tents protect the cable trench and joint bay from adverse weather effects while jointers are working on carrying out fault repairs, maintenance and installation of LV (Low Voltage), MV (Medium Voltage) and HV (High Voltage) cables.
Jointers Tents | Product Overview
Cable Jointers Tents | Square Style Speed Tent For Cable Jointing LV HV –Â more infoÂ
Cable Jointers Tents | Triangle Style Speed Tent For Cable Jointing LV HV – more infoÂ
Jointers Umbrellas | Non Conductive LV HV Jointers Umbrellas – more infoÂ
Fibre Optic Cable Jointers & Splicing Tents | Network Rail Approved – more infoÂ
Pictured | Premium Cable Jointers Triangle Tent – translucent triangle tent with full height entrance door.
Thorne & Derrick can supply Jointers Tents from stock to provide temporary weather protection to underground cables during repair, jointing and splicing – the tent is installed to ensure LV HV cables are safely connected in a clean dry environment.
Triangle A Type Jointers Tents
Sheerspeed Triangle Speed Tent are cable jointers tents suitable for protection against water ingress and weather effects into cables and joints when LV HV cable jointing – caters for varying cable trench sizes.The triangular shaped tents have entrances and exits at both ends. By zipping open both, the cable jointers tents can be expanded to create a dry place to work.
Premium Cable Jointers Triangle Tent | Translucent Triangle Jointers Tent with full height entrance door.
Mid-Range Triangle Jointers A Tent | Choose from a solid colour, or two mixed. Nylon/Polyester material.
Premium PVC Triangle A Tent – Solid Colours | Choose from a solid colour, or two mixed.
EV Charging Tents
Electric Car EV Charger Installation PVC Pop-up Work Tent – 2.5(l) x 2.5(w) x 2.5m(h).
Specifically designed with 2.5m height to cover EV Charge Points.
Network Rail PADS Approved Tents
Railway Fibre Optic Cable Jointing Tents. Premium Network Rail Approved Fibre-Optics Triangle Speed Tent.
Street Lighting Jointers Tents
LV Jointers Street Lighting Work Tents. Lamp Post Triangle Speed Tent.
Wind Calculations For Jointers Tents
There are several variables that dictate the performance of a Jointers Tent in windy conditions:
- Number of guy lines/straps used to secure the tent
- Ground conditions and soil composition
- Peg depth and angle
- Angle and length of guy line/straps
- Wind conditions
- Constant
- Gusting
- Varying directions
- Orientation of tent to wind direction
- For any given extreme wind conditions a fully erected tent may withstand but an attempt to erect a tent in these conditions may be at risk
- Measurement of wind speed equipment
- Equipment and location of equipment relative to wind
- Number of measurement devices required
Due to the above variables any theoretically calculated performance figure cannot be verified or applied in practise – additionally individual Health & Safety requirements across the industries dictate their own specific requirements including specific operator practises. Through training of operators in the use of the different specific tent designs it is recommended all operators perform a site risk assessment prior to the use of any tents for copper cable jointing or fibre splicing applications.
Thorne & Derrick International distribute the most extensive range of Cable Pulling & Cable Laying Equipment to enable the installation of low, medium and high voltage power cables into underground trench or duct – products also supplied for fibre optic blowing, subsea trenching, offshore umbilical installations and pulling armoured cables onto cable tray.