Cable Jointers Tents | Triangle Style Speed Tent For Cable Jointing LV HV
CABLE JOINTERS TENTS
Triangle style Speed Tents are cable jointing tents suitable for protection against water ingress and weather effects into cables and joints when LV HV cable jointing – caters for varying cable trench sizes.
The triangular shaped tents have entrances and exits at both ends. By zipping open both, the cable jointers tents can be expanded to create a dry place to work. Note – the smallest Jointers tent 1.5 x 1.5 x 1.45 is single zip only.
Avoidance of Rain & Fumes
If there is a possibility of rain during cable jointing a tent must be erected, one end of which must be open to ensure good entry and exit and good ventilation for fumes. The cable joint position must be kept dry when jointing and splicing copper or fibre type LV MV and HV cables, including 11kV/33kV power cables.
When jointing cables care must be taken by the Jointer not to char or burn any PVC material, such as cable sheath, as this will cause toxic gases to be given off. During the tinning or sweating operation care should be taken by the to avoid the inhalation of large volumes of the fume given off, and tent flaps should be raised to permit the flow of clean air through the tent. At the same time the Jointer should position himself in such a way that the clean air flow carries the fumes away from his face.
CABLE JOINTERS TENTS – STANDARD SPECIFICATIONS
- 350gms translucent PVC reinforced flame retardant BS7837:1996 – allows maximum amount of natural light into work area
- Tent seams 100% waterproof
- Robust die cast central joints
- Centre joint protection (Integrated)
- Conductivity & operator finger protection
- No loose components – integrated frame & cover design
- Fibreglass framework of the jointers tent
- Rubber protected feet for extended product life
- Non-conductive – fibreglass framework
- 2off guy lines & tent pegs
- All spare parts available
- Wet storage properties
Prices on Application
SPEED TENT Triangle
|Cable Jointing Tent Part Number||Tent Size (depth x width x height)||Tent Weight (kg)|
|150 PT 145H||1.5 x 1.5 x 1.45 m (Single Zip)(5 x 5 x 4.8 ft) – 6kg||6|
|180 PZT||1.8 x 1.8 x 1.75 m (Double Zip)(6 x 6 x 5.5 ft) – 9kg||8.5|
|180/250 PZT||1.8 x 2.4 x 1.5 m (Double Zip) (6 x 8 x 5 ft) – 10kg||9|
|250 PZT||2.4 x 1.8 x 1.5 m (Double Zip) (8 x 6 x 5 ft) – 11kg||15|
|300/250 PZT||3.0 x 2.4 x 2.1 m (Double Zip) (10 x 8 x 6.5 ft) – 12kg||16.5|
|300 PZT||3.0 x 3.0 x 1.9 m (Double Zip) (10 x 10 x 6.5 ft) – 19kg||17|
|CB 11||H D Carry Bag – up to 1.8m||2|
|CB 11ext||H D Carry Bag – 2.5m to 3.0m||2.5|
- Additional lower section colours
- Heavy duty carry bag
- Ballast bags – Gravel/Water
- Additional front and rear zips
- Tent repair kits
Thorne & Derrick International distribute the most extensive range of Cable Pulling & Cable Laying Equipment to enable the installation of low, medium and high voltage power cables into underground trench or duct – products also supplied for fibre optic blowing, subsea trenching, offshore umbilical installations and pulling armoured cables onto cable tray.