Cable Jointers Tents | Square Style Speed Tent For Cable Jointing LV HV

Cable Jointers Tents | Square Style Speed Tent For Cable Jointing LV

Cable Jointers Tents | Square Style Speed Tent For Cable Jointing LV HV

Cable Jointers Tents

Square style Speed Tents are cable jointing tents suitable for protection against water ingress and weather effects into cables and joints when LV HV cable jointing – the tents are designed for all butt fusion welding requirements.

Avoidance of Rain & Fumes

If there is a possibility of rain during cable jointing a tent must be erected, one end of which must be open to ensure good entry and exit and good ventilation for fumes.

The cable joint position must be kept dry when jointing and splicing copper or fibre type LV MV and HV cables, including 11kV/33kV power cables.

When jointing cables care must be taken by the Jointer not to char or burn any PVC material, such as cable sheath, as this will cause toxic gases to be given off. During the tinning or sweating operation care should be taken by the Jointer to avoid the inhalation of large volumes of the fumes emitted, and tent flaps should be raised to permit the flow of clean air through the jointers tent. At the same time the Jointer should position himself in such a way that the clean air flow carries the fumes away from his face.

Jointers tents are flame retardant, non-conductive with availability in different sizes and different zip options:

  • Jointers Tents Model 180 5ST BF (1 Zip front door / 1 Short zip rear) Fold size – 1.45m x 0.3m) – Erect in just 10-15 seconds
  • Jointers Tents Model 180 5ST (2 Zip front door) Fold size – 1.45m x 0.3m)
Square Cable Jointers Tents - Zip Options

Square Cable Jointers Tents – Zip Options

Cable Jointers Tents – Standard Specifications

  • 350gms Translucent PVC reinforced Flame Retardant BS7837:1996 – allows maximum amount of natural light into work area
  • Material replicates a frosted bathroom window with no direct visibility through
  • 100% waterproof seams
  • Wet storage properties
  • Robust die cast central joints
  • Centre joint rubber protection
  • Non conductivity and finger protection
  • No loose components – integrated frame & cover
  • Fibreglass framework
  • Non-conductive tents
  • Rubber protected feet for extended product life of the tent
  • 3off guy straps & tent pegs
  • Storage bag
  • All spare parts available

Prices on Application

Speed Tent Square

Technical Specification

Cable Jointing Tent Part Number  Tent Size (l)x(w)x(h)  Tent Weight (kg)
100 5ST 1.0×1.0x1.6m
(3.0×3.0x5.3ft)
8.0
100 5ST 1.0×1.0x1.8m
(3.0×3.0x6ft)
8.5
125 5ST 1.25×1.25×2.0m
(3.5×3.5×5.3ft)
10
150 5ST
150/125 5ST
1.5×1.5×2.0m
1.5×1.25×2.0m
12
170 / 100 5ST 1.7 x 1.0 x 1.5m
(5.5×3.3x5ft)
13
125 / 180 5ST 1.25 x 1.8 x 2.0 m
(4x6x7ft)
13
150 / 180 5ST 1.5 x 1.8 x 2.0 m (5x6x7ft) 13.5
180 5ST 1.8 x 1.8 x 2.0 m (6x6x7ft) 14
200/180 5ST 2.0x 1.8 x 2.0m
(7x6x7ft)
16
200 5ST 2.0 x 2.0 x 2.0m 18
210 5ST 2.1 x 2.1 x 2.0 m (7x7x7ft) 19
250 / 180 5ST 2.4 x 1.8 x 2.0 m 20
250 5ST 2.4x 2.4 x 2.0 m (8x8x7ft) 21
270 5ST 2.7 x 2.7 x 2.0 m (9x9x7ft) 23
300/200 5ST 3.0 x 2.0 x 2.0 m
(10×6.5x7ft)
20
300 5ST 3.0 x 3.0 x 2.2 m
(10x10x7ft)
25
360 5ST 3.6 x 3.6 x 2.2 m
(12x12x7ft)
38
400 5ST 4.0 x 4.0 x 2.3 m
(13x13x7.5ft)
41
CB11 H D Carry Bag 1m to 2m
CB11ext H D Carry Bag 2.1m to 3m
CB12 H D Carry Bag 3.1m to 4m

 

Additional options:

  • Additional lower section colours – White, Blue, Black, Green, Orange, Yellow
  • PU coated polyester/nylon
  • Heavy duty carry bag
  • Ballast bags – gravel/water
  • Additional front and rear zips
  • Rear door entrance
  • Windows
  • Tent repair kits
Square Style Speed Tent For Cable Jointing LV | Quick & Easy To Assemble

Square Style Speed Tent For Cable Jointing LV MV HV | Quick & Easy To Assemble