33kV Joint Single Core XLPE CWS 630-1200sqmm Cables | Nexans GTS 36GTS1.1200i

Nexans GTS 36GTS1.1200i

33kV Heatshrink Cable Joints

630-1200sqmm Cable Joint | XLPE Single Core Cables 33kV Medium/High Voltage Class

Nexans GTS 36GTS1.1200i is part of the Nexans GTS1 range of heat shrink cable joints suitable for jointing MV HV single core polymeric insulated cable (XLPE) to be directly buried underground or located in air onto cable containment in onshore or offshore environments.

These 33kV cable joints are suitable for use with copper wire screened cables – the heat shrinkable cable joint is fully screened and fully submersible and can be supplied with all common types of conductor connectors including compression crimp (Cembre) or mechanical shearbolt (Pfisterer Sicon) types.

Nexans GTS heat shrink cable joints meet the requirements of CENELEC HD 629.2 and IEC 60502-4 standards.

GTS cable joints, manufactured by Nexans are suited to use with other cable types, contact Thorne & Derrick for more information.

➡ See also Nexans GTS3 for XLPE 3 core 11kV 24kV 33kV Cables – where heat shrink is not permitted due to the presence of flammable gases in potentially explosive atmospheres or hazardous area locations please see our range of Cold Shrink Joints for LV, MV, HV power cables systems.

Nexans GTS1 Cable Joints

Ordering Instructions

33kV Cable Accessories, including Joints & Terminations, should only be installed by Trained and Competent personnel – contact us to discuss training courses for 11kV, 33kV and 66kV power networks.

Example: The copper wire screened cable is 33kV, 150 mm² stranded aluminium. Order: 36GTS1.240i.

Heat SHRINK CABLE JOINTs

NEXANS GTS1

1. Dual wall heat shrink tube type
2. Stress control tube
3. Stress control mastic
4. Non-tracking tube (only for 36GTS1)
5. Overall protection tube
6. Sealing mastic
7. Screen continuity (copper mesh)
8. Conductor connector (supplied on request)
9. Ferrule for screen wires

NEXANS 36GTS1.1200i 33kV CABLE JOINT

KIT CONTENTS

Nexans 36GTS1.1200i 33kV cable joint kit contains:

• 1 x Stress control mastic “MNAC”
• 1 x Sealing mastic “NGAF”
• 1 x Black stress control tube “GT1”
• 1 x Anti-tracking tube “GT2” (only for 36GTS1)
• 1 x Dual wall heat shrink tube “GT25”
• 1 x Overall protection tube “GT4”
• 1 x Roll of tinned copper mesh tape
• See also Cable Terminations | Nexans
• Jointing & Preparation Tools for MV HV Cables

The jointing kit also comprises cable jointing installation instructions, semi-conductive tape, adhesive tape, a copper braid and a ferrule for the screen wire connection.

Nexans GTS1 Kit Contents

➡ See our complete range of HV Joints & Terminations including cold installed, cold shrink cable joints for MV-HV cables.

Data Sheets

• Data Sheet – Nexans GTS1 | 33kV Cable Joints | Single Core XLPE CWS Heat Shrink Joints
  Download