6.6kV 7.2kV Cable Termination Kits HV 3 Core XLPE Indoor (Heat Shrink)
Cable Termination 6.6kV | 3 Core | XLPE | Indoor
XLPE cable termination kits using heat shrink technology are suitable for indoor terminating of medium/high voltage (MV-HV) 3 core cables up to 7.2kV.
Used to terminate 6.6kV/7.2kV power cables into MV-HV switchgear, transformer, motor or cable boxes – outdoor 6.6kV cable termination version available.
3 Core XLPE Cable Termination
hIGH VOLTAGE HV INDOOR HEAT SHRINK
- Cable Termination Type – Heat Shrink
- Termination Location –Â Indoor
- Voltage – 6.6kV / 7.2kV
- Cable Insulation Type – XLPE EPR (Polymeric)
- Number of Cores – 3 Core
- Conductors – 25sqmm, 35sqmm, 50sqmm, 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm, 300sqmm, 400sqmm, 500sqmm
- Heat Shrink Standard Tail Length – 650mm
- Suit 6.6kV Cables – BS6622, BS7835, BS7870, BS6883, BS7917 & IEC60502-2
6.6kV cable Termination Testing & Selection
Shrink Polymer Systems test 6.6kV heat shrink joints and terminations as detailed in CENELEC standards HD 628 S1 and 629.1 S2:2006 encompassing VDE 0278 and IEC 60502.
The following table enables the heat shrink termination kit selection for 3 core indoor XLPE cables up to 7.2kV – customised terminations available to suit all types of high voltage polymeric cables cables.
 ➡ More 6.6kV Terminations : Single Core Indoor 7.2kV XLPE | Single Core Outdoor 7.2kV XLPE
Also MV HV : 3M Cold Shrink Terminations | Euromold Separable Connectors | Pfisterer Inner Cone Plugs | Cable Cleats | Cable Glands | Duct Seals | ToolsÂ
| 6.6kV/7.2kV 3 Core Cable Termination Indoor | Heat Shrink Cable Termination Kit Range | 6.6kV/7.2kV 3 Core Cable Termination Outdoor |
| 3TIS-7.2X-A | 25-50sqmm | 3TES-7.2X-A |
| 3TIS-7.2X-B | 70-120sqmm | 3TES-7.2X-B |
| 3TIS-7.2X-C | 150-240sqmm | 3TES-7.2X-C |
| 3TIS-7.2X-D | 300-500sqmm | 3TES-7.2X-D |
Cable Termination Kit List
| Anti Track Heat Shrink Core Tubes (Red) | 3 |
| Stress Control Heat Shrink Tubes (Black) | 3 |
| Yellow Stress Relief Tape (Screened HV XLPE Cable only) | 3 |
| 3 Core Breakout Boot | 1 |
| Red Mastic Sealing Tape | 1 |
| XLPE Cable Cleaning Degreasing Wipes | 3 |
| HV Jointing Instructions 3 Core XLPE Indoor | 1 |
Watch how to install MV HV Terminations & Joints
6.6kV Termination Accessories
Complete supporting range of indoor cable termination accessories for 6.6kV 3 core cables.
6.6kV Cable Termination Bushing Boots | Cable Glands | Screen Earth Kits | Cable Lugs
HV Terminations, Connectors, Plugs
T&D distribute HV heat shrink, cold shrink and plug-in style cable terminations and connectors for high voltage connection of power cables to air, gas or oil insulated switchgear and transformers, 11kV-33kV.
T&D Approved Stockist – 3M, Elastimold, Nexans Euromold & Pfisterer
INSTRUCTION 6.6kV 7.2kV Cable Termination Kits XLPE 3 CoreDownload
