Euromold 400LB Elbow Connector 11kV 24kV

View Sub Products

Euromold 400LB

Euromold 400LB is a screened separable elbow connector specified to terminate and connect medium/high voltage cables in the following voltage classes:

The Euromold 400LB elbow connector with 630A current rating is designed for Interface C and covers voltages from 12kV to 24kV with a maximum conductor size of 300sqmm.

  • 6/10 (12kV)
  • 6.35/11 (12kV)
  • 8.7/15 (17.5kV)
  • 12/20 (24kV)
  • 12.7/22 (24kV)

Euromold 400LB plug-in elbow connectors can be supplied as a tee connector (400TB or 440TB) and with surge arrester 400PB  – all suitable for use with Interface C Symmetrical type bushings on SF6 gas-insulated switchgear.

Euromold 400LB separable elbow connector are designed to connect all polymeric screened cables to suit CENELEC Interface Type C (630amp) equipment bushings up to 24kV.

Designed to connect polymeric insulated cables with a copper wire screen but can be used on wire armoured, copper tape screen cables with the use of additional screen earth kits and accessories.

Connector accessories include: dead-end receptacle, dead-end plug, stand-off plug and earthing plug for type C interfaces.

  • Manufacturer – Nexans Euromold
  • MV HV Equipment Bushing Connector – Interface C Symmetrical
  • Maximum Operating Current – 630A (Amps)
  • Voltage Classes – 12kV 24kV Maximum
  • Terminate & Connect Cables – Polymeric XLPE EPR
  • Conductor Cross Section Sizes – 25-300sqmm
  • Applications – MV HV Switchgear, Transformers, Motors

➡ See complete range of Nexans Euromold Connectors 

EUROMOLD 400LB Specification

Euromold separable
Current Ir (A) Conductor sizes (sqmm)
min max
400LR/G 12kV 630 Amps 25 300
K400LB/G 24kV 630 Amps 25 300
Euromold 400LB Elbow Connector 11kV 24kV - Design

Euromold 400LB Elbow Connector 11kV 24kV – Design

Separable elbow connector comprising:

  1. Conductive EPDM insert.
  2. Conductive EPDM jacket.
  3. Insulating EPDM layer moulded between the insert and the jacket
  4. Type C – 630 A interface as described by CENELEC EN 50180 and 50181
  5. Conductor connector (not included in the standard kit)
  6. Insulating plug
  7. Cable reducer
  8. Earthing lead
  9. Transition contact M10/M16

The thick conductive EPDM jacket provides a safe to touch screen which ensures safety for personnel, cables and electrical equipment in medium/high voltage installations.

Euromold 400LB Selection Table

For Screened MV HV Elbow Connectors

Select the Euromold ordering part number which positions the cable most central to the minimum and maximum core insulation diameter. Add a ‘K’ for use up to 24 kV.

The complete Euromold 400LB elbow connector kit comprises the following components – cable lubricant, wipers, installation instructions and crimp chart.

Kit Contents for Euromold 400LB Connectors

Kit Contents for Euromold 400LB Connectors


Euromold 400LB
Part Number
Dia. over core insulation (mm)
min max
3 x 400LB/G-11 12.0 17.5
3 x 400LB/G-15 16.0 22.0
3 x 400LB/G-19 20.0 26.5
3 x 400LB/G-22 23.5 31.0
3 x 400LB/G-25 26.5 32.5
3 x 400LB/G-27 28.5 37.5


Euromold MV HV Cable Terminations, Connectors, Elbows & Joints

Euromold MV HV | Cable Terminations, Connectors, Elbows & Joints

Euromold | Connect | Joint | Terminate MV HV Cables – view our complete range of HV Joints & Terminations in heat shrink, cold shrink, push-on and plug-in versions.