Cembre B-TC250ND Battery Cable Cutting Tool
Cembre B-TC250ND Battery Cable Cutting Tool
B-TC250ND
Cembre B-TC250ND battery cutting tools are designed for use by LV-HV cable jointers to cut Copper, aldrey, Aluminium, Aluminium-Steel cables and Steel ropes, Aluminium and Steel rods with a maximum overall cable diameter of 25mm.
Cembre cutting tool blades are manufactured from high strength steel and heat treated to ensure extended service life – the cable cutting tool head rotates through 180 degrees enabling the user to cut cables in the most comfortable position and can be opened easily to allow cutting of running cables.
The Cembre B-TC250ND cutting tool is fitted with a maximum hydraulic pressure valve.
B-TC250ND is easily manageable during the cutting process and, by the use of bi-component plastics, has a shell with high resistance to wear and damage. Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area.
Cembre B-TC250nd cutting tool
Specification
- Max Cutting Diameter: 25mm
- Operating temperature: -15 to +50 ° C
- Rated Operating Pressure: 600 bar (6,800 psi)
- Cordless Hydraulic Cutting Tool
- Dimensions: 401mm x 136mm x 81mm
- Cable Cutter Weight: 3.5kg
- Battery Material: Li-Ion
- Battery Voltage: 18V
- Battery Current: 2 Ah
Cembre cutting tools should be cleaned daily (or after use) with a clean cloth removing any residue in particular particles close to pivots and moveable parts. Every six months it is essential check the oil level in the reservoir. If necessary fill oil level to the top lip and remove any excess air from the reservoir.
For storage and protection the Cembre B-TC250ND tool is supplied in a robust carrying bag for storage of the cutting tool.
Cembre B-TC250ND | Cable Cutting Tool | Battery Operated Cable Cutter
Cembre B-TC250ND
Technical Data
| Cutting Capacity | |||
| Material | Tensile Strength (daN/mm2) |
Max Cutting Diameter (mm) | |
| ROPES & CONDUCTORS |
Copper | ≤ 41 | 25 |
| Aluminium | ≤ 20 | 25 | |
| Aldrey | ≤ 34 | 25 | |
| Steel | ≤ 180 | INDICATIVE EXAMPLES :7 x 3,0 : Ø est. = 9,0 mm 19 x 2,1 : Ø est. = 10,5 mm 19 x 2,3 : Ø est. = 11,5 mm |
|
| Multi Strands Steel (Strands QTY  ≥ 220) | ≤ 180 | 18 | |
| ACSR | ≤ 180 | 25 INDICATIVE EXAMPLES: 26 x 2,50 + 7 x 1,95 : Ø est. = 15,85 26 x 3,06 + 7 x 2,38 : Ø est. = 19,38 26 x 3,60 + 7 x 2,80 : Ø est. = 22,80 |
|
| RODS | Steel | ≤ 60 | 13 |
| ≤ 42 | 16 | ||
| Copper | ≤ 30 | 20 | |
| ≤ 25 | 23 | ||
| Aluminium | ≤ 16 | 25 | |
The B-TC250ND tool is supplied as:
- Basic tool with battery and shoulder strap
- Spare battery
- Battery charger
- Plastic carrying case suitable for storing the tool and accessories
Cable Cutting Safety
Keep hands clear from cutting blades ♦ Do not cut steel ♦ Wear safety glasses and gloves ♦ Read tool instructions prior to cutting cable
Cembre Cutting Tools
Underground Cables & Overhead Lines
- Power Cables: LV-MV-HV Armoured & Unarmoured Cables (6.6kV 11kV 33kV 66kV 132kV). EHV, Subsea Cables & Umbilicals
- Utility Cables: LV-HV Power BS6622 BS7870 (XLPE & EPR – Triplex) including Lead Covered & LV Waveform Cables
- Offshore & Marine Cables: (IEC 60092, BS6883, NEK606, IEC 60331)
- Telecoms Cables: Copper Cables (Aerial, Duct/Underground Buried & Wire)
- Low Voltage Aerial Bundled Cables (ABC Mains & Service Cable)
- High Voltage Overhead Conductors: Copper & Aluminium
Cembre hydraulic crimping tools are available to suit all types of cable installations.
Cable Cutting & Crimping Tools For LV-MV-HV Power Cables, Conductors & Lines
Cembre B-TC250ND Battery Cable Cutting Tool – Operating ManualDownload
