Capstan Winch | CBS C-1035 Lightweight Winch

lightweight capstan winch

CBS C-1035 Winch

The Lightweight winch is designed by CBS Products for overhead lines to provide reliable and safe lifting operations for 11/33kV manhole work and maintenance requirements. Winching is controlled via a proportional hydraulic valve giving the operator precise control over the load when needed or high speed if necessary.

Thorne & Derrick International distribute the most extensive range of Cable Pulling & Cable Laying Equipment to enable the installation or stringing of low, medium and high voltage power cables and conductors into underground trench, duct or pylon towers.

Cable Winch Specification

Powered by a 5.5HP Honda engine through a right angle gearbox, the C-1035-05 offers a pulling capacity of 500kg. The C-1035-10 has an 8HP Honda Engine with a pulling capacity of 1000kg.

Cable Winch ORDERING INFORMATION

These Lightweight Capstan Winches are designed specifically for use over manholes.

optional extras

Overhead Line Winches | Tower Erection Winches | Capstan Winch

Underground Cable & Overhead Lines | LV MV HV EHV

Thorne & Derrick International distribute the most extensive range of Cable Installation Equipment to enable the pulling-in, laying and cutting of LV MV HV underground power cables (trench or duct) and stringing of overhead line conductors typically at 132kV, 275kV and 400kV transmission voltages – products and plant is also supplied for winching cables, fibre optic blowing, subsea trenching, offshore umbilical installations and pulling armoured cables onto cable tray. From OHL tower to MV HV substation, we supply LV HV Cable Jointing, Earthing, Substation & Electrical Eqpt  – this includes the most extensive range of Ex Stock Innovation Tooling to facilitate safe and reliable preparation, termination, jointing and installation of cables.

HV Tools

Data Sheets

• Capstan Winch | CBS C-1210-500-1 Petrol Winch
  Download
• Capstan Winch | CBS C-1035 Lightweight Winch
  Download