Euromold 600 Series Connectors | MV HV
➡ To view the complete range of Euromold 600 Series Connectors and medium/high voltage cable accessories for use with Interface C Bushings please see below.
THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
Euromold 600 Series Connectors | MV HV
➡ To view the complete range of Euromold 600 Series Connectors and medium/high voltage cable accessories for use with Interface D Bushings please see below.
THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
T&D stock and supply cable accessories to Cable Cleat, Gland, Joint & Terminate armoured/unarmoured multicore (SWA) or single core (AWA) power cables into low and high voltage substations – the LV cable installation accessories support electricity distribution to main distribution switchgear, sub-distribution boards and transformers.
CMP Glands | 3M Joints | Cembre Lugs | Ellis Cleats | LV Cable Accessories
Euromold 700 Series Connectors | MV HV
➡ To view the complete range of Euromold 700 Series Connectors and medium/high voltage cable accessories for use with Interface E Bushings please see below.
THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
T&D stock and supply cable accessories to Cable Cleat, Gland, Joint & Terminate armoured/unarmoured multicore (SWA) or single core (AWA) power cables into low and high voltage substations – the LV cable installation accessories support electricity distribution to main distribution switchgear, sub-distribution boards and transformers.
CMP Glands | 3M Joints | Cembre Lugs | Ellis Cleats | LV Cable Accessories
Euromold 900 Series Connectors | MV HV
➡ To view the complete range of Euromold 900 Series Connectors and medium/high voltage cable accessories for use with Interface F Bushings please see below.
THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
T&D stock and supply cable accessories to Cable Cleat, Gland, Joint & Terminate armoured/unarmoured multicore (SWA) or single core (AWA) power cables into low and high voltage substations – the LV cable installation accessories support electricity distribution to main distribution switchgear, sub-distribution boards and transformers.
CMP Glands | 3M Joints | Cembre Lugs | Ellis Cleats | LV Cable Accessories
Cable Terminations | Heat Shrink | Cold Shrink | Push-On | MV HV Medium & High Voltage
Nexans ITK type MV cable terminations are cold shrink terminations consisting of 3 factory pre-assembled silicone tubes comprising stress relief and sealing mastic.
Nexans ITK cold shrink tubing is suitable for terminating single core polymeric insulated cables, such as XLPE or EPR, with working voltage classes of 11kV and 24kV.
Nexans terminations are available in both heat shrink, cold shrink and slip-on type technologies for terminating cables into switchgear, transformers and pole-mounted applications – single core termination kits are available for MV cables with copper wire or copper tape screen and armoured/unarmoured construction.
The Cold Shrink Termination is suitable for MV-HV power cables with aluminium or copper conductors – the termination accommodates both shearbolt cable lugs or crimp lugs.
The following table enables the selection of Nexans ITK indoor cold shrink terminations for single core 11kV and 24kV voltage cables:
| Cold Shrink Termination Type |
Voltage Um (kV) |
Strike Distance L (mm) |
Diameter Over Core Insulation (mm) |
Conductor Sizes (sqmm) | ||
| min | max | min | max | |||
| Nexans ITK 212 | 11kV 12kV | 260mm | 14mm | 33mm | 50sqmm | 400sqmm |
| Nexans ITK 312 | 11kV 12kV | 300mm | 30mm | 50mm | 400sqmm | 1000sqmm |
| Nexans ITK 224 | 24kV | 260mm | 14mm | 33mm | 25sqmm | 240sqmm |
| Nexans ITK 324 | 24kV | 300mm | 30mm | 50mm | 300sqmm | 800sqmm |
➡ More Cable Jointing Videos | Heat Shrink Terminations | Heat Shrink Joints Transition | Heat Shrink Joints Straight | Separable Connectors | Cold Shrink Joints
The Euromold range of Separable Connectors are suitable for the termination of power cables onto all MV-HV bushing interfaces:
 |
 |
 |
 |
 |
 |
THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
View the complete range of Nexans Terminations | Joints | Connectors
Published 25 Mar 2026
klauke ekm60unv – universal cutting, crimping & punching tool The Klauke EKM 60 UNV is a versatile battery powered hydraulic universal tool engineered that can be used as a battery powered cable crimping tool and battery operated cable cutting tools that comes...
Published 18 Mar 2026
INDUSTRIAL LABEL PRINTING SOLUTIONS When clear, durable and professional identification is required across control panels, cable systems, production facilities and industrial installations, print quality, reliability and ease of use are critical. Cembre industrial label printers are designed to support...
