LinkedIn Archive

MONO Nexans Terminations for 11kV Connection of Switchgear in DNV-GL Classification

MONO Nexans Terminations

Pictured | This afternoon, we are airfreight shipping 72-off Nexans MONO 11kV Terminations direct to Lisnave, a ship repair yard located in Setubal (Portugal) that is equipped with 6 drydocks, 9 repair berths and occupies an area of 1 500 000 m².

Key to securing the business for Thorne & Derrick, the Main UK Stockist for the Nexans Power Cable Accessory range was acceptance of our technical submission by client, ready stock availability and Marine Classification Approval type DNV-GL.

Refreshingly, price was never a decision driver.

See more here | DNV GL Approved Cable Accessories, Joints, Terminations & Connectors

Cable Terminations Marine Approved DNV GL

Thorne & Derrick | LV HV Cable Jointing & Electrical Equipment distribute DNV GL Approved Cable Accessories manufactured by Nexans Power Accessories including elbow connectors and cable terminations for the reliable distribution of medium and high voltage power in the marine and offshore sectors up to 33kV.

Distributors for 3M Electrical & ColdShrink | Nexans Euromold | Pfisterer CONNEX | Joints, Terminations & Connectors Ex Stock up to 66kV

MV Cable Terminations

Nexans | Medium Voltage Product Training for Main UK Stockists

Distributor | Stockist | Supplier | Nexans

Heat shrink, cold shrink, push-on and slip-over cable accessories enable the jointing, terminating and connection of 11kV-33kV and 66kV-132kV cables to oil, air or gas insulated switchgear, transformers, motors and overhead lines distributing electricity at MV HV.

Thorne & Derrick hold large stocks of 11kV 33kV 66kV Joints & Terminations suitable for XLPE, PILC and EPR cables, in both heat shrink and Cold Shrink technologies, to service the medium/high voltage power cable accessory and connection requirements of UK and international customers.

Nexans

Yesterday, Jon Rhodes took centre-stage online as we held our inaugural “Q&A Roundtable” with Nexans Power Accessories. Jon expertly fielded and answered technical questions for 90 mins posed by the Thorne & Derrick Sales Team.

Jon simplified the complex and covered topics as diverse as AIS-GIS operational differences and impact on MV Connection selection, VD point purpose, ATEX Explosive Atmospheres, Piggybacking (PB V P2), TX Applications, Compact C v Symmetrical C Separable Connectors and the granular breakdown of the Euromold part code structuring.

We all learnt so much and are so thankful to Jon.

Following 5 consecutive years of astonishing business growth with Nexans we are committed to supporting and increasing their Brand, Product and Market share.

We have now calendared monthly online Events with Jon to focus on further building our knowledge, expertise and confidence to most effectively support the Nexans brand of MV Cable Accessories in the UK.

Pictured : Jon focussing here on the features of MONO – MONO is the Nexans brand of medium voltage terminations featuring integrated stress control for reduced shrinking and reduced error scope by the jointer – the cable terminations provide stable performance under severe environmental conditions with exceptional tracking and erosion resistance, mechanical strength, weatherability and dielectric properties.

In attendance and in awe from Thorne & Derrick were the following staff : Jeff Jhanke | David Tinning | Carl Cox | Jonathan Hewitt | Sarah Henderson | Gary Amos | Charlie Andreoletti | Laurence Taylor | Chris Dodds

Nexans Medium Voltage Product Training for Main UK Stockists

NEXANS | EUROMOLD CONNECTORS | JTS JOINTS | MONO TERMINATIONS | EX STOCK – contact us with your Enquiry.

Nexans Power Cable Accessories Medium Voltage

BAND-IT Cable Clamping Products – Training Day at Thorne & Derrick

Band-It Products

Steve Franklin (Business Development Manager – Cable Management from BAND-IT) has supported and managed the Thorne & Derrick | LV HV Cable Jointing & Electrical Equipment Account for 25+ years. Today, Steve called into refresh and re-focus our Sales Team on the new business opportunities that the market-leading BAND-IT IDEX electrical range of Cable Support & Management Systems provide to both traditional (Oil & Gas), transitional (Renewable Energy) and emerging (Fuel Cell) markets.

Thanks for the project support, the cable tie and banding product demo’s and the frankly unrivalled service record you have provided to our business in our supply-chain history.

We’ve gained some wrinkles, lost some hair but together we have always kept faith and I am pleased we remain a key account to BAND-IT, as BAND-IT does to Thorne & Derrick.

BAND-IT Cable Ties, Band & Buckle Clamping Systems – Stainless Steel

66kV Jointing Tools | Alroc CAMF Tools Now in Stock

66kV Jointing Tools

WE LISTENED, SO INTO STOCK….. SHAVE, REMOVE, CHAMFER, & GROOVE

Thorne & Derrick have introduced the Alroc CAMF tools into stock to support customers in the UK & European offshore wind project marketplace. CAMFs are designed purposely for use with 66kV+ XLPE insulated IAC & power cables to provide balanced, consistent and precise cable preparation. CAMFs shave bonded semicon and remove insulation up to 90mm diameter without wobble, struggle or risk to HV cable integrity.

Manufactured by ALROC | NOW Stocked in UK by Thorne & Derrick | LV HV Cable Jointing & Electrical Equipment.

View the complete range of Cable Jointing Tools available from Thorne & Derrick International for stripping and preparing low, medium and high voltage power cables including 11kV, 33kV, 66kV and 132kV-400kV polymeric cables with XLPE or EPR insulation and bonded/peelable semi-conductive cable screens.

Suits MV HV EHV Cables 40-90mm Diameter | Stocked & Supplied by Thorne & Derrick

Thorne & Derrick | Distributed from Stock | Approved Supplier | UK & Export Sales