Home > Blog > Cable Terminations | Cold Shrink Terminations MV HV Cables

Cable Terminations | Cold Shrink Terminations MV HV Cables

Published 13 Mar 2018

Cold Shrink Terminations

Cable Terminations | Heat Shrink | Cold Shrink | Push-On | MV HV Medium & High Voltage

  • Category: Nexans Power Cable Accessories Videos
  • Product: Cable Terminations
  • Type: Cold Shrink Cable Termination
  • Cable Termination Range: Nexans ITK
  • Voltage Category: MV Medium Voltage | HV High Voltage
  • Voltage Classes: 11kV/12kV | 24kV
  • Manufacturer: Nexans
  • Uploaded By Chris Dodds – Thorne & Derrick Sales & Marketing Manager

Cable Terminations

Nexans ITK type MV cable terminations are cold shrink terminations consisting of 3 factory pre-assembled silicone tubes comprising stress relief and sealing mastic.

Nexans ITK cold shrink tubing is suitable for terminating single core polymeric insulated cables, such as XLPE or EPR, with working voltage classes of 11kV and 24kV.

Nexans terminations are available in both heat shrink, cold shrink and slip-on type technologies for terminating cables into switchgear, transformers and pole-mounted applications – single core termination kits are available for MV cables with copper wire or copper tape screen and armoured/unarmoured construction.

The Cold Shrink Termination is suitable for MV-HV power cables with aluminium or copper conductors – the termination accommodates both shearbolt cable lugs or crimp lugs.

Nexans ITK

MV HV Cold Shrink Indoor Cable Terminations

Up To 24kV

The following table enables the selection of Nexans ITK indoor cold shrink terminations for single core 11kV and 24kV voltage cables:

Cold Shrink Termination Type
 Voltage
Um
(kV)		 Strike
Distance L
(mm)		 Diameter Over
Core Insulation
(mm)
 Conductor Sizes (sqmm)
min max min max
Nexans ITK 212 11kV 12kV 260mm 14mm 33mm 50sqmm 400sqmm
Nexans ITK 312 11kV 12kV 300mm 30mm 50mm 400sqmm 1000sqmm
Nexans ITK 224 24kV 260mm 14mm 33mm 25sqmm 240sqmm
Nexans ITK 324 24kV 300mm 30mm 50mm 300sqmm 800sqmm

 

➡ More Cable Jointing Videos | Heat Shrink Terminations | Heat Shrink Joints Transition | Heat Shrink Joints Straight | Separable Connectors | Cold Shrink Joints

Euromold

The Euromold range of Separable Connectors are suitable for the termination of power cables onto all MV-HV bushing interfaces:

Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs - Interface A Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface B Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface C Compact Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface C Symmetrical Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface D Nexans Euromold Separable Connectors MV HV Elbows Tees Plugs – Interface E

THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

Further Reading