3M LCT2 Cold Shrink Cable Termination

Cold Shrink Cable Terminations – 3M LCT2

3M LCT2

70-120sqmm 1.9/3.3kV Cable Termination

3M LCT2 is part of a series of the 3M LCT Cold Shrink Cable Termination kits suitable for terminating unscreened 3 Core XLPE EPR 1.9kV/3.3kV power cables with SWA (steel wire armour) to BS5467 with cross sectional area of 70-120sqmm – single core terminations for 3.3kV 6941AB cable manufactured to BS5467 can also be kitted.

Offshore Cables

Due to the cold-applied technology of Cold Shrink, the 3M LCT2 cable termination is installed extensively in potentially explosive atmospheres and hazardous area (HAZLOC) locations for the connection of offshore and marine cables to BS6883 specification (Types SW2 SW3 SW4) and fire resistant cable BS7917 (Types FO F1), including IEC60331.

3M LCT2 are used to terminate BS6883 type EPR insulated armoured cables with galvanised steel wire braid (GSWB) and phosphor bronze (TPWB) or tinned ATEX Cable Glands copper wire braid (TCWB).

Complete supporting range of Cold Shrink joints are also available for 3.3kV cables to be jointed in onshore and offshore locations.

3M Cold Shrink LCT Series Terminations use 3M Cold Shrink Technology, eliminating the need for resin, heat and special tools, making a quick, simple and reliable installation.

Typically used to terminate unscreened (not screened) cables up to 3.3kV without copper wire or copper tape screens in installations where heat shrink terminations are precluded due to the presence of flammable gases in hazardous areas and potentially explosive atmospheres according to the Zone 1 and Zone 2 categorisation by the ATEX Directive.

3M LCT2 Termination

Kit Content

LCT2 cable termination suitable for cross section area cables 70-120sqmm 3 Core 1.9/3.3kV cables:

Cold Shrink Pre Stretched Outer Tube
Cold Shrink Three Way Breakout Boot
Self Amalgamating Insulation Tape – Scotch 23
Armour/Earth Connection Components
Full Cable Termination Installation Instructions
Compatible With Cable Lugs (Crimp) | Cable Lugs (Shearbolt)

3M LCT2 Cold Shrink Cable Termination

3M Cold Shrink Termination Part Number	Cross Sectional Area (sqmm)
3M LCT/1	35 – 50
3M LCT/2	70 – 120
3M LCT/3	150 – 185
3M LCT/4	240 – 400

Shelf Life

3M Cold Shrink Tubes, Breakouts and insulation tapes have a 5 year shelf life from date of manufacture when stored at the recommended temperature of 10-27°C at <75% Relative Humidity.

3M Cable Terminations & Joints

Full range of Joints, Terminations & Cable Repair Products for use with LV (Low Voltage), MV (Medium Voltage) and HV (High Voltage) power cables, switchgear and substation systems using 3M Scotchcast and Cold Shrink technologies.