Home > Products > Single Cable Cleats – Ellis Patents > Ellis Patents 1 Hole Single Cable Clamps – LSF LUL London Underground Approved > Ellis 1F-16 LUL LSF B Plastic Cable Clamps

Contact us

Get quote

Ellis 1F-16 LUL LSF B Plastic Cable Clamps

Ellis 1F-16 LUL LSF B Plastic Cable Clamps

Ellis Cable Cleats

Single Cable Cleats 

Ellis 1F-16 single hole cable clamps are manufactured by Ellis Patents from plastic and are designed as standard in 3 material options:

  • B Black Polpropylene
  • LSF Low Smoke Fume (Flame Retardant V0 Zero Halogen) Nylon
  • LUL London Underground Ltd Approved Material

LUL approved Ellis Patents 1F Single/One Hole Cable Clamps/Cleats are compliant with the requirement of London Underground (LU) Standard 1-085. Product Register No.363 – contact us for further information about our complete range of LV MV HV Rail Cable Accessories with LU London Underground and Network Rail approvals.

LUL Cable Cleats

Ellis Patents 1F-16 cable cleats are suitable for securing single-way power cables between 32-38mm overall cable diameter.

1 Hole Plastic Cable Clamps form part of the Ellis Patents range of single cable cleats – also available as aluminium 2 hole plastic cable clamps with an overall cable diameter between 38-168mm.

Ellis Cable Clamp 1F-16

Technical Specification

  • Cable Clamp Diameter Min 32mm
  • Cable Clamp Diameter Max 38mm
Ellis 1F-16 LUL LSF B Plastic Cable Clamps

Ellis 1F-16 LUL LSF B Plastic Cable Clamps 32-38mm

Ellis patents 1F-16 Clamp Dimensions

  • Material Suffix – (B) Black polypropylene, (LSF) black flame retardant V0 zero halogen phosphorus free Nylon, (LUL) London Underground approved material
  • Width 63.1mm
  • Height 49.0mm
  • Clamp Depth 41.4mm
  • E 12.1mm
  • 1 x M 10 Clamp Fixing Holes
  • Weight (B) 34.2g, (LSF) 46.2g, (LUL) 55.7g

SINGLE CABLE CLEAT SELECTION TABLE

Specification details for Ellis Patents 1F-16 Plastic 1 Hole Single Cable Clamps for single cable applications:

1 Hole Plastic Cable Clamp Part Number Material Suffix Cable Dia Range (mm) Dimensions  (mm) Fixing Hole Pack Qty Weight (g)
W H D E B LSF LUL
1F-16 B/LSF/LUL 32-38 63.1 49.0 41.4 12.1 1 x M10 100 34.2 46.2 55.7

Ellis 1F-16 LUL LSF B Plastic Cable Clamps

1 Hole Plastic Single Cable Clamps – Installation Instructions
1. Position the cable clamp and fixing (not supplied) onto the support structure. Position the cable clamp Position the cable clamp
2. Install cable. Install the cable Install the cable
3. Locate the other half of the cable clamp. Secure with a nut and washer (not supplied) to the support structure and tighten. Locate the other half of the cable clamp Locate the other half of the cable clamp
4. Important: Do not over tighten the clamp. The clamp should secure the cable but does not need to be so tight that the cable bulges at either side of the clamp or becomes angled excessively. Do not overtighten the cable clamp Do not overtighten the cable clamp

 

Rail Cable Accessories, Electrification & Installation Equipment

Thorne & Derrick stock and distribute an extensive range of 400V-33kV Rail Cable Accessories & Power Distribution Systems including feeder pillars to contractors undertaking Low Voltage Power Distribution, HV Electrification & Substations, DC Traction & Networks, OLE and Track Feeder Cable Renewals – complete range of Network Rail PADS approved track terminations, cable joints, cable repair and connection products up to 25kV, including 3M Cold Shrink, Pfisterer CONNEX and Nexans Euromold products.

Full range of Cable Pulling Equipment & Products to ensure safe and efficient of rail cables in to cable ducts and containment infrastructure including cable troughs.

Enquire

Data Sheets