Euromold 800PB Coupling Connector 11kV 33kV 42kV

Euromold 800PB is a screened separable coupling connector for dual cable arrangement specified to terminate and connect medium/high voltage cables in the following voltage classes:

• 6/10 (12) kV
• 6.35/11 (12) kV
• 8.7/15 (17.5) kV
• 12/20 (24) kV
• 12.7/22 (24) kV
• 18/30 (36) kV
• 19/33 (36) kV
• 20.8/36 (42) kV

The Euromold 800PB coupling connector with 630A – 1250A current rating is designed for Interface C and covers voltages from 12kV to 42kV with a maximum conductor size of 1200sqmm.

Euromold 800PB plug-in coupling connectors can be supplied as a straight connector (450SR) or a tee connector (480TB, 484TB or 489TB) and with surge arresters (800SA or 300SA) – all suitable for use with Interface C Compact type bushings on SF6 gas-insulated switchgear – can also be installed on any 8-series coupling connector for a multiple cable arrangement.

Designed to connect polymeric insulated cables with a copper wire screen but can be used on wire armoured, copper tape screen cables with the use of additional screen earth kits and accessories.

Connector accessories include: dead-end receptacle, dead-end plug, stand-off plug and earthing plug for type C Compact interfaces.

• Manufacturer – Nexans Euromold
• MV HV Equipment Bushing Connector – Interface C Compact
• Maximum Operating Current – 630A or 1250A (Amps)
• Voltage Classes – 12kV 24kV 36kV 42kV Maximum
• Terminate & Connect Cables – Polymeric XLPE EPR
• Conductor Cross Section Sizes – 35-300sqmm
• Applications – MV HV Switchgear, Transformers, Motors

➡ See complete range of Nexans Euromold Connectors   

➡ The Nexans Euromold 800TR is used for the 800PB Coupling Connector Type. The Euromold 400TR & 400TR-LB & 800TR MV Test Rods are designed to find cable fault location, phase checking and cable testing up to 11kV/24kV/33kV/36kV.

EUROMOLD 800PB Specification

Euromold 800PB Coupling 11kV 33kV 42kV – Design

Separable coupling connector comprising:

1. Interface designed to fit 480TB, 484TB and 489TB connectors.
2. Contact rod.
3. Conductor contact.
4. Conductive EPDM insert.
5. Conductive EPDM jacket.
6. Insulating EPDM layer moulded between the insert and the jacket.
7. Cable reducer.
8. Conductive EPDM cap.
9. Basic insulating plug (with VD point).
10. Earthing lead.

The thick conductive EPDM jacket provides a safe to touch screen which ensures safety for personnel, cables and electrical equipment in medium/high voltage installations. The screen break design enables cable outer sheath testing without removing or dismantling the connector.

Euromold 800PB Selection Table

For Screened MV HV Coupling Connectors

Select the Euromold the ordering part number which gives you the best centring of your core insulation diameter and substitute X using table X, according to the conductor size (sqmm) and type (copper or aluminium). Order Euromold MT connector kit to enable termination of copper tape screened MV-HV cables in voltage range 11kV (12kV) to 42kV – suitable for copper wire screened cables.

The complete Euromold 800PB coupling connector kit comprises the following components – cable lubricant, field control mastic, installation rod, gloves, wipers, roll adhesive tape, installation instructions and crimp chart.

Kit Contents for Euromold 800PB Connectors

*Will include an adapted installation instruction.

Euromold MV HV | Cable Terminations, Connectors, Elbows & Joints

Euromold | Connect | Joint | Terminate MV HV Cables – view our complete range of HV Joints & Terminations in heat shrink, cold shrink, push-on and plug-in versions.

Data Sheets

• Euromold Interface C Compact Connectors, Bushings & Surge Arresters
  Download
• Euromold 800PB Coupling Connector 11kV 33kV 42kV
  Download
• Nexans Euromold – Interface C Enquiry Sheet
  Download