Class 3 Matting – 26.5kV Electrical Insulating Rubber Mats ASTM D178 Type 2

Class 3 Matting - 26.5kV Electrical Insulating Rubber Mats ASTM D178 Type 2

Class 3 Matting – 26.5kV Electrical Insulating Rubber Mats ASTM D178 Type 2

Class 3 matting type SM556-03 is a high quality fine ribbed rubber insulating matting which is fully certified to meet American National Standard ASTM D178 Type 2, Section 5:

  • Class 5.1.2.1-A O-Zone Resistant
  • Class 5.1.2.2-B Flame Resistant
  • Class 5.1.2.3-C Oil Resistant

The ASTM D178 Class 3 matting is fully certified and tested to 40kV with a recommended safety working voltage of 26.5kV.

Additionally the electrical insulating matting has a fine ribbed, anti-slip surface pattern on one side and a cloth impression finish on the reverse side ensuring safe electrical working conditions for users.

SM556-03 insulating matting is available in stock lengths of 10m x 0.91m with a thickness of 9.5mm and on request can be produced in cut length sizes and a variety of colours or with flame retardant, low emission grade materials.

➡ Also Class 3 Matting IEC61111

Class 3 Matting

ASTM D178 Type 2

Technical Information

Insulating Matting Part Number SM556-03
Matting Application Electrical Safety, General Purpose, Health & Safety
Insulating Matting Product Description 26.5kV Working Voltage ASTM D178 ANSI JS.7 Type 2 Class 3 Anti-Slip Electrical Safety Matting
Sections: 5.0.0/1-A OZONE, /2-B FLAME, /3-C OIL
Matting Thickness 9.5mm
Colour Black. Others available on request
Insert Req No
Solid Yes
Drainage Holes No
Dielectric Test Voltage 40kV
Surface Proof Test Voltage 20kV
Class 3 Matting Working Voltage 26.5kV
Stock Roll Sizes 10m x 0.91m x 9.5mm Mat
Weight 8.45kg/m²
Compound NR
Hardness (Shore A) 65º
Density (SG) 1.3
Tensile Strength 5 MPA
Elongation (Min) 250%
Abrasion Resistance 180mm³
Minimum Temperature -20ºC
Maximum Temperature +70ºC

American National Standard ASTM D178

The American National Standard ASTM D178 outlines the requirements for rubber matting for electrical purposes and specifies the construction materials, thickness, width and the testing conditions and results expected to meet the standard – this covers low, medium and high voltage (LV MV HV) electrical protection and safety when working around switchboards and plant rooms.

Contact T&D for prices, delivery and technical support for SM556-03 26.5kV Class 3 Type 2 Electrical Insulating Mats.

➡ See also Class 1 Matting | Class 2 Matting | Class 4 Matting | IEC Matting

MV-HV insulating matting also available for safe working on switchgears/switchboards up to 33kV.

Insulating Matting

Insulating Matting | Electrical Safety & Protection for Low, Medium & High Voltage Switchgear

CATU Electrical Safety MV HV

T&D stock and distribute the complete range of CATU Electrical Safety Equipment.

CATU offer a range of Arc Flash Clothing For High Voltage Utility Cable Jointers & Lloyds NERS LV-HV Electrical Contractors

CATU offer a range of Arc Flash Clothing For High Voltage Utility Cable Jointers & Lloyds NERS LV-HV Electrical Contractors

Data Sheets