uploaded by Chris Dodds - Thorne & Derrick Sales & Marketing Manager
UKPN Tile Tape & Stokbord Covers
UK Power Networks, UKPN, are a UK Distribution Network Operator distributing low and high voltage electricity covering South East England, the East of England and London – we overview current UKPN recommendations and specifications for Cable Protection Tapes & Covers using Tile Tape and Stokbord cable protection products.
Note these are subject to change: check with Thorne & Derrick Sales.
This should assist LV-HV Cable Jointing, Installation & Civil Engineering Contractors installing the appropriate level of LV-HV Cable Protection for underground power cables.
T&D are Approved Vendors to UKPNand their contractors providing competitive prices and technical support for LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment including low voltage electrical distribution feeder pillars manufactured by Lucy Zodion from the Fortress range.
All cables and cable ducts shall be protected by a cable protection tape or a Stokbord, the tape used depends upon the highest cable voltage to be protected:
LV Service Cables – Tile Tape (40m x 200mm x 2.5mm) – UKPN Stores Code = 04040C
LV Mains Cables – Tile Tape (40m x 200mm x 2.5mm) – UKPN Stores Code = 04040C
11kV MV Cables – Tile Tape (40m x 200mm x 2.5mm) – UKPN Stores Code = 04040C
22kV MV Cables – Tile Tape (40m x 200mm x 2.5mm) – UKPN Stores Code = 04040C
33kV MV Cables – Stokbord (1000mm x 244mm x 9mm) – UKPN Stores Code = 04041M
66kV HV Cables – Stokbord (1000mm x 244mm x 9mm) – UKPN Stores Code = 04041M
132kV HV Cables – Stokbord (1000mm x 244mm x 9mm) – UKPN Stores Code = 04041M
Cable protection tape or covers shall be installed so that they fully cover the width of the cable or cable duct installed below them.
Excerpt from UKPN Engineering Construction Standard ECS 02-0019
Installation of Underground Cables – LV to 132kV
Document Number: ECS 02-0019
Version: 10.0
Date: 02/06/2015
Summary:The ECS 02-0019 Standard details the minimum requirements acceptable for the installation of new LV, 11kV, 20kV, 33kV, 66kV and 132kV cables plus associated pilot and telephone cables.
T&D supply Utilities & Approved Contractors with cable pulling products including cable rollers, cable socks and drum lifting jacks to enable the installation of low voltage and high voltage cables intro trench or duct: this includes single core, 3 core and Triplex 11kV/33kV power cables and LV waveform, mains and service cables.
Centriforce Tapetile and Stokbord underground cable protection tiles and covers are the market leading, heavy duty utility protection system for protecting underground cable and pipes – this includes low voltage, medium voltage and high voltage power networks working at 11kV/33kV up to and including 132kV/275kV extra high voltage cables.
➡ The following Selection Table outlines the current approved Cable Protection Systems for UK DNO’s for underground medium and high voltage cables.
Northern Powergrid
Centriforce
Tapetile
150×2.5mmx40m
Northern Powergrid
Centriforce
Tapetile
200×2.5mmx40m
Northern Powergrid
Centriforce
Stokbord
1000x244x12mm
Scottish Power
Centriforce
Tapetile
200×2.5mmx40m
Scottish Power
Centriforce
Stokbord
1000x244x12mm
UK Power Networks
Centriforce
Tapetile
200×2.5mmx40m
UK Power Networks
Centriforce
Stokbord
1000x244x9mm
Western Power Distribution (WPD)
Centriforce
Stokbord
1000x450x12mm
Western Power Distribution (WPD)
Centriforce
Stokbord
1000x244x12mm
Scottish & Southern Energy (SSE)
Centriforce
Stokbord
1000x244x12mm
GTC
Centriforce
Tapetile
150×2.5mmx40m
GTC
Centriforce
Tapetile
200×2.5mmx40m
National Grid
Centriforce
Tapetile
200×2.5mmx40m
National Grid
Centriforce
Stokbord
1000x300x14mm
National Grid
Centriforce
Stokbord
1000x450x14mm
Centriforce Benefits
Centriforce Stokbord and Tapetile heavy duty plastic underground cable covers have virtually replaced concrete cable covers, tiles and plates for several reasons:
Clearest warning of underground buried cables to third parties
Can be custom made with sizes to suit specific utility cable protection for 11kV, 33kV, 66kV and 132kV
Contains bold warning text and UK DNO logo for clear cable identification
Damage to medium and high voltage cables less likely therefore reducing the cost of repairs, jointing and outages
Lightweight and easy to install cable covers irrespective of weather and soil conditions
Durable with good impact resistance
Rotproof and resistant cable covers to wide range of soil conditions
Electrical Explosion – An 11kV Cable Strike
Two construction companies have been fined £90,000 after workers were seriously burned, and one scarred for life, after they cut into a live 11kV electrical cable. Unprotected underground cables distributing medium and high voltage electricity pose serious health and safety dangers.
UK DNO’s
T&D are Specialist Distributors to the UK Distribution Network Operators (DNO’s), NERS Registered Service Providers, ICP’s and High Voltage Jointing Contractors of an extensive range of Cable Joints, Substation, Distribution, Tooling & Installation Equipment approved by the utilities:
T&D distribute the most extensive range of LV, MV & HV Cable Jointing, Terminating, Cable Pulling & Installation Equipment – we service UK and international clients working on underground cables, overhead lines, substations and electrical construction at LV, 11kV, 33kV and EHV transmission and distribution voltages.
Thorne & Derrick invite you to join LinkedIn’s largest LV-HV Electrical Discussion Group : Low & High Voltage Power, Cabling, Jointing & Electricals. Discussion subjects include cable installations, cable jointing, substation, overhead line and electrical construction at LV, 11kV, 33kV and EHV. Network, engage and promote your profile, company or products with over 10,000 influencers.
Northern Powergrid, NPG, are a UK Distribution Network Operator distributing low and high voltage electricity covering North East England, – we overview current NPG recommendations and specifications for Cable Protection Tapes & Covers using Tile Tape and Stokbord products.
This should assist LV-HV Cable Jointing, Installation & Civil Engineering Contractors installing the appropriate level of LV-HV Cable Protection for underground power cables.
T&D are Approved Vendors to NPG and their contractors providing competitive prices and technical support for LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Trenchless Excavation
Where appropriate, trenchless excavation shall be considered as a viable option when installing underground cable. Application of this option shall always employ the cable being laid in a suitable and approved duct as shown below.
Trenchless Installation Duct Requirements
Cable Type
Cable Size
Duct (Outside Diameter)
Metallic Auxiliary
All
125mm PE SDR-11 Black
Fibre Auxiliary
All
125mm PE SDR-11 Black
Fibre Auxiliary (Sub-Duct)
All
32mm PE SDR-11 Black
LV Service
All
75mm PE SDR-11 Black
LV Main
All
125mm PE SDR-11 Black
11kV to 20kV
Triplex up to 300sqmm
125mm PE SDR-11 Black
Triplex above 300sqmm
160mm PE SDR-11 Black
33kV
Single Core
160mm PE SDR-11 Black
Triplex up to 400sqmm
160mm PE SDR-11 Black
66kV to 132kV
All
180mm PE SDR-11 Black
All ducting used in trenchless excavation shall be solid wall circular section duct (SDR-11) as specified in ENA-TS 12-24 – ‘Plastic Ducts for Buried Electric Cables 2008’and NPS/002/003 – ‘Technical Specification for Protective Tile, Tile Tape and Cable Ducting’ and all cables require advanced warning and this will normally be in the form of an embossed black duct compliant with ENA-TS 12-24 – ’Plastic Ducts for Buried Electric Cables 2008’.
Open Cut Trench
Open Cut Trench Installation Requirements
Cable Type
Cable Size
Public Footpath (OD / ID mm)
Private Domestic (OD / ID mm)
Private Non-Domestic (OD / ID mm)
Road (OD / ID mm)
Metallic Auxiliary
All
96.5/90 Duct & Tile Tape
96.5/90 Duct & Tile Tape
96.5/90 Duct & Tile Tape
96.5/90 Duct & Tile Tape
Fibre Optic Auxiliary
All
96.5/90 Duct & Tile Tape
96.5/90 Duct & Tile Tape
96.5/90 Duct & Tile Tape
96.5/90 Duct & Tile Tape
LV Service
All
Laid Direct & Tile Tape
38/34 or 46 Duct & Tile Tape
Laid Direct & Tile Tape
150/125 Duct* & Tile Tape
LV Main
All
Laid Direct & Tile Tape
150/125 Duct* & Tile Tape
Laid Direct & Tile Tape
150/125 Duct* & Tile Tape
11kV to 20kV
Up to 300sqmm
Laid Direct & Tile Tape
175/150 Duct* & Tile Tape
Laid Direct & Tile Tape
150/125 Duct* & Tile Tape
Above 300sqmm
Laid Direct & Tile Tape
175/150 Duct* & Tile Tape
Laid Direct & Tile Tape
175/150 Duct* & Tile Tape
33kV
Triplex up to 400sqmm
160/150 Duct & Tile Board
160/150 Duct & Tile Board
160/150 Duct & Tile Board
160/150 Duct & Tile Board
All Single Core
160/150 Duct & Tile Board
160/150 Duct & Tile Board
160/150 Duct & Tile Board
160/150 Duct & Tile Board
66kV to 132kV
All Single Core
160/50 Duct & Tile Board
160/150 Duct & Tile Board
160/150 Duct & Tile Board
160/150 Duct & Tile Board
*Assumes twin wall ducting. All others are single smooth wall design.
All sizes for ducts installed in open trenches are nominal diameter measurement and should have tile tape or tile board installed above the cables / ducts ensuring an overlap of 50mm either side of the cable(s)/duct(s).
Cables in the range 230V to 20kV shall be laid under tile tape positioned 150mm directly above the top of the uppermost cable / duct and 33kV to 132kV shall be laid under tile boards positioned 75mm directly above the top of the uppermost cable / duct with each tile board shall be closely interlocked with adjacent covers throughout the length of the cable.
All ducting used in open trench excavation shall be used as part of cable installation works shall be as specified in NPS/002/003 – ‘Technical Specification for Protective Tile, Tile Tape and Cable Ducting’.
Cables installed for future jointing to existing cables shall be adequately overlapped to allow easier jointing.
T&D supply Utilities & Approved Contractors with cable pulling products including cable rollers, cable socks and drum lifting jacks to enable the installation of low voltage and high voltage cables intro trench or duct: this includes single core, 3 core and Triplex 11kV/33kV power cables and LV waveform, mains and service cables.
klauke ekm60unv – universal cutting, crimping & punching tool The Klauke EKM 60 UNV is a versatile battery powered hydraulic universal tool engineered that can be used as a battery powered cable crimping tool and battery operated cable cutting tools that comes...
INDUSTRIAL LABEL PRINTING SOLUTIONS When clear, durable and professional identification is required across control panels, cable systems, production facilities and industrial installations, print quality, reliability and ease of use are critical. Cembre industrial label printers are designed to support...