Capstan Winch | CBS C-1210 Single Winch

Capstan Winch | CBS C-1210 Single Winch


CAPSTAN WINCH

CBS C-1210 Winch |  CBS Products

The CBS C-1210 Capstan Single winch is a versatile solution specifically designed to offer a light winch.

The single winch has been designed to provide a light and powerful universal winch. Suitable for hoisting loads up poles or transmission towers or pulling cables and conductors.

Thorne & Derrick International distribute the most extensive range of Cable Pulling & Cable Laying Equipment to enable the installation or stringing of low, medium and high voltage power cables and conductors into underground trench, duct or pylon towers.

Capstan Winch | CBS C-1210 Single Winch

Capstan Winch | CBS C-1210 Single Winch


Winch Specification

➡ Contact Thorne & Derrick for the complete range of cable rollers, cable socks, conduit rods and underground cable protection.

Capacity 450kg
Rope Speed 12m/min
Capstan Diameter 140mm
Length  510mm
Width 165mm
Weight 16kg
Power Supply 115V AC

Winch Ordering Information
C-1210 Single Capstan Electric Winch with foot control, steel box, rope lock device, and universal bracket assembly
Overhead Line Winches | Tower Erection Winches | Capstan Winch

Overhead Line Winches | Tower Erection Winches | Capstan Winch


CAPSTAN WINCH C1210 | SPARES

C-1210-01-F Steel Storage Box
C-1210-02-F Rope Lock Device
C-1210-03-F Universal Bracket
C-1210-AS1020-S Foot Switch Assembly

The optional rope locking device eliminates the need to tie off the rope. A remote foot control switch operates the 115 volt electrically powered winch.


Optional Extras

D-918-14-100-01-F 100m of 14mm 3 strand pre-stretched rope with 50mm hard eyes
D-918-14-100-F 100m of 14mm 3 strand pre-stretched rope with soft eyes
C-GEB-KIGE-02-110-F 110V 2300W generator

Underground Cable & Overhead Lines | LV MV HV EHV

Thorne & Derrick International distribute the most extensive range of Cable Installation Equipment to enable the pulling-in, laying and cutting of LV MV HV underground power cables (trench or duct) and stringing of overhead line conductors typically at 132kV, 275kV and 400kV transmission voltages – products and plant is also supplied for winching cables, fibre optic blowing, subsea trenching, offshore umbilical installations and pulling armoured cables onto cable tray. From OHL tower to MV HV substation, we supply LV HV Cable Jointing, Earthing, Substation & Electrical Eqpt– this includes the most extensive range of Ex Stock Innovation Tooling to facilitate safe and reliable preparation, termination, jointing and installation of cables.

HV Tools

HV Tools

Data Sheets