Cable Winching System | CBS C-825 Portable Hydraulic System
Cable Winching System
CBS C-825 Portable Hydraulic Cable System
The CBS 825 is designed by CBS Products to provide a fully portable winching system, by breaking down into easily transportable modules.
Ideally suited for overhead line stringing work such as ABC conductors, bare conductors or re-conductoring projects, it provides a flexible system suitable where access is restricted and ground disturbance is undesirable.
Thorne & Derrick International distribute the most extensive range of Cable Pulling & Cable Laying Equipment to enable the installation or stringing of low, medium and high voltage power cables and conductors into underground trench, duct or pylon towers.
The winch can be pole mounted or ground mounted using the optional frame. The C-825 Hydraulic Winch comprises of a strong lightweight pole mounting frame with securing chains and incorporates a hydraulic drive and control lever.
➡ Contact Thorne & Derrick for the complete range of cable rollers, cable socks, conduit rods and underground cable protection.
C-825 Cable Winching Key Features
- Strong Lightweight and Portable: This winch can be pole mounted or ground mounted using the optional frame. Securing chains and incorporates a hydraulic drive and control lever.
- Stability: Operational stability with securing chains and incorporating a hydraulic drive and control lever.
Cable Winch Specification
| Output Torque | 615Nm / Avg. Tension 300kg |
| Speed Control | Fail-Safe, bi-directional section, creep and inching facility |
Overhead Line Winch
Applications
The CBS C-825 winch is particularly useful for overhead line engineers working on power lines and communication cables. Its ability to handle different conductor materials and configurations makes it suitable for a range of projects in the electrical utilities and telecommunications sectors.
Overall, the CBS C-825 winch is an essential tool for professionals in the field, offering a blend of power, precision, and portability.
Hydraulic power pack | CBS C-825
 |
This unit is powered by an air-cooled, 8hp petrol driven engine, delivering 20 litres/min at a working pressure of 138 bar from the hydraulic circuit. The circuit is protected with return line and suction filters. CE approved. |
| Length | 720mm |
| Width | 530mm |
| Height | 615mm |
| Weight | 66kg |
| Hydraulic Tank Capacity | 5 Litres |
Winch Ordering Information
| C-825-01 | Pole Mounted Hydraulic Winch with layering arm |
| C-1204-1 | Hydraulic power pack with 7m hoses |
Optional extras
| C-821-02 | 700mm diameter drum fitted with 400m of 8mm Paraline Rope |
| C-821-03 | 700mm diameter drum fitted with 600m of Paraline Rope |
| C-A1-680-27 | Split drum for retrieving old conductor |
| C-825-07 | Split drum (Outboard type) |
| C-825-06 | Grounding frame and anchor rods |
| C-825-09 | Carrying handle for hydraulic motor |
Overhead Line Winches | Tower Erection Winches | Capstan Winch
Underground Cable & Overhead Lines | LV MV HV EHV
Thorne & Derrick International distribute the most extensive range of Cable Installation Equipment to enable the pulling-in, laying and cutting of LV MV HV underground power cables (trench or duct) and stringing of overhead line conductors typically at 132kV, 275kV and 400kV transmission voltages – products and plant is also supplied for winching cables, fibre optic blowing, subsea trenching, offshore umbilical installations and pulling armoured cables onto cable tray. From OHL tower to MV HV substation, we supply LV HV Cable Jointing, Earthing, Substation & Electrical Eqpt – this includes the most extensive range of Ex Stock Innovation Tooling to facilitate safe and reliable preparation, termination, jointing and installation of cables.
HV Tools
Winching System CBS C-825 Portable Hydraulic SystemDownload
