PFISTERER | CONNEX & SEANEX
Superpowerful PFISTERER presentation today from Mark Hanlon : the most mind-blowingly comprehensive and advanced portfolio of MV & HV Cable Accessories to build the grid required to meet our planets aggressive hunger for electric power. Thanks for visiting with Daniel Leech and delivering the sample SEANEX 66kV Joint & Termination which we exhibit at SPE Offshore Europe in September. We can look forward to working together to develop new business opportunities and specifications at 66kV and 132kV substations. Our Team all look forward to the Product Training Day at your UK Training Facility.
Stockists & Suppliers
MV HV High Voltage Cable Joints | Cable Terminations | Cable Connectors | Distributed from Stock | UK & Export Sales
Ripley US02-7000 Semicon Shaver & Stripping Tools
Here Peter Hardman (Jointer – LV HV Cables) is shown expertly using the US02-7000 Tool manufactured by Ripley Tools to remove the bonded semi-conductor screen from Medium Voltage Power Cables – the cable standard type is N2XS(F)2Y (12/20 (24)kV) typically used for MV Power Distribution in several industrial sectors including data-centres.
When correctly selected and used for their intended application, specialised Cable Preparation Tools can and do prevent much of the human error identified in the field as a cause of cable joint or termination failure – this can allow MV HV cable systems to last well beyond the 30 year limit that many consider to be a cables expected life cycle.
Invest in the correct tools, get trained in their use and use them.
Start + Stop | note the integral start/stop facility guaranteeing closely controlled, perfectly clean and precise shaving by the Jointer across all cable diameter applications.
The Bonded Semicon Shaving Tool has a unique blade shape which preserves the smooth surface on the XLPE insulation of medium voltage cables typically distributing electrical power at 11kV and 33kV voltages – the Ripley US02 tool eliminates the need for deburring or additional surface finishing of the cable insulation. Its optimal stability design securely supports cables with diameters from 18mm to 60mm throughout the shaving operation of the cable preparation process, prior to jointing or terminating medium voltage cables.
The US02 tool provides an exceptionally smooth finish and does not require lubricating grease as the integral wheels provide a sustained motion during the cable preparation process – the US02 has four settings on it that adjust the pitch as it winds down the cable and a stop that enables the jointer to provide a square cut to finish off. The settings are 0.5mm, 1mm, 1.5mm and 2mm.
Precision Accuracy & Effortless Repeatability for MV Cable Preparation
No Grease & No Clamps | MV HV Cables up to 60mm Diameter without the requirement for lubrication using Ripley US02-7000.
Thorne & Derrick supply LV HV Cable Accessories, Installation & Electrical Equipment to service providers working on hyper-scale data centres including Equinix, Virtus, K2, Microsoft, CyrusOne and Interxion. We have recently supplied Warsaw RDCC (Rapid Deployment Data Centres) with sealing systems for the protection of cable ducts against water ingress/gas migration and cable termination products for the connection of 33kV power cables into gas-insulated switchgear and transformers – the project is part of a $1 billion digital transformation plan for Poland announced by Microsoft.
We can assist with the Competitive Supply & Technical Specification of joints, terminations, connectors and preparation tools for the energisation of all types of air or gas insulated electrical equipment from stock up to 66kV.
MV HV – Medium & High Voltage Cable Joints, Terminations & Connectors (11kV 33kV EHV)
Thorne & Derrick | Connecting High Voltages & Energising Data Centres
Vicera Cable Stand Products | Supplied in the UK & Europe by Thorne & Derrick
Approved by & Used by Nexans | NKT | Ensto | Prysmian Group | TE Tyco
uploaded by Chris Dodds | Sales & Marketing Manager at Thorne & Derrick International
Thorne & Derrick are now Official Distributors for the Vicera range of Cable Jointing Stands – the introduction of this new product range is an excellent extension to our core ranges of Cable Jointing, Pulling Equipment & Preparation Tooling and we look forward to further supporting efficient, easier and more reliable power cable installations.
The Vicera range of Cable Stands are for both field or training centre use and provide safe and stable support of Low, Medium & High Voltage Cables – the cable stands are suitable for cable diameters 18-90mm with adjustable height.
The Cable Joint Stands feature stepless lateral and tilt adjustment and high strength clamps to prevent cable slippage or movement while jointing – secure and balanced cables when Jointers are undertaking highly skill-sensitive cable preparation prevents inadvertent damage to cables and future potential O&M reliability.
The cable support stands are rugged and durable for outdoor use in joint bays and trenches in all ground terrain conditions – this includes the support of 11kV/33kV/66kV cables to enable precise cable preparation by the Jointer prior to installation of joints, terminations or connectors on medium/high voltage power cables.
The Jointing Stands are used in the field to enable the completion of pole-top style outdoor terminations and also indoor substation Jointing & Termination installations.
Provides support and stability for LV HV Cables Ø 18–90mm
Image | JK Jointing Ltd
Pictured | Vicera APU2.0 | Here the APU2.0 is shown supporting 33kV BS7870 XLPE Copper Wire Screen single core 1000sqmm cables.
Quantity Discount Available
Pictured | Cable stand manufactured by Vicera providing support and stability to medium voltage cables undergoing the termination, connection and installation of Nexans Euromold type P909TB/G screened separable connectors.
💡 Bart Baeyens (Nexans Technical Customer Manager) – “the cable stands provide the necessary stable position to prepare any cable without issues, thanks to the weight and clever design. You can easily adjust height and position resulting on a comfortable position in every situation.”
Pictured | The Vicera APU2.0 Cable Jointing Stand in place at the PFISTERER UK Training facility in the UK. Working alongside PFISTERER we can also assist in the CONNEX & SEANEX Certification of Jointers to support competency of workmanship and safeguard the integrity of medium/high voltage power cable systems across all industries – their UK Jointer Training facility is a global Centre of Excellence for Competency Certification up to 245kV.
Thorne & Derrick distribute the most extensive range of MV HV Medium & High Voltage Cable Joints, Terminations & Connectors from manufacturers including 3M, Prysmian, Nexans Euromold, Elastimold, Pfisterer CONNEX & SEANEX.
We stock Heat shrink, Cold shrink, Push-on and Slip-over cable accessories enable the jointing, terminating and connection of 11kV-33kV-66kV cables to oil, air or gas insulated switchgear, transformers, motors and overhead lines distributing MV HV electricity.
Thorne & Derrick also supply from stock Jointing Tools to enable the Cutting, Crimping & Preparation of all onshore and offshore LV MV HV Cables – this includes the removal of sheath/jacket, screen, insulation and precision engineered procedures of the cable preparation process including chamfering, bevelling, grooving and shaving.
MV HV High Voltage Cable Joints | Cable Terminations | Cable Connectors | Distributed from Stock | UK & Export Sales
Tools & Consumables
Pictured | A consolidated customer order prepared for despatch from Thorne & Derrick to a leading High Voltage Power & Jointing Contractor in the renewable energy sector – we can assist with an extensive range of Cable Accessories & Tooling to enable the installation, termination and test of both FO and IAC HV cables up to 66kV.
This order includes:
FO Tooling | Fibre Optic Strippers, Kevlar Cutting Tools, FO Cable Sheath Jacket Strippers, Spirit Level, Tweezers, Bent Nose Forceps, Angled Long Nose Pliers, Flare Nut Spanner, Jointers Knives, Flat Terminal Screwdrivers, Junior Hacksaw, Power Cutters, Worklights. Brands including Miller, Bahco & Knipex.
HV Tooling | Sheath Strippers, Semicon Screen Strippers, Insulation Removal Tools, Ratchet Spanners, Soldering Iron, Heat Shrink Gas Torch, Diameter Tape, Vernier Calipers, Nylon Hammer, Jointers Knife, Wire Brush. Brands including Alroc, Boddingtons & Sievert.
Cable Splice, Joint & Termination Consumables | Chinagraph Pencils, Cable Cleaning Wipes, Greases, Heat Shrink, Cold Shrink End Caps, Cable Lugs. Brands including Peli, 3M Electrical, Cembre & Pfisterer.
Specialist Distributors to the UK and international Offshore Wind & Renewable industry to provide safe and reliable LV HV Electrical Cable & Power Distribution Systems up to 66kV – we are highly customer responsive and absolutely committed to providing a world-class service. Contact our UK Power Team for competitive quotations, fast delivery from stock and technical support or training on all LV-HV products.
Thorne & Derrick International are Specialist Suppliers to the UK and international Offshore Wind Industry of products to provide safe and reliable LV HV Electrical Cable Termination, Jointing, Installation & Power Systems up to 66kV.
We are based in North-East England, recognised as a key strategic location to service the offshore renewables energy market in the UK, from the North Sea to the Nordics – our Exports Division support international offshore wind power projects from USA to China.
Key Product Categories: Connectors, Joints & Terminations MV HV | Cable Preparation & Jointing Tools | Duct Seals | Cable Transits | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Clothing & Protection | Cable Pulling | Earthing & Lightning Protection | Feeder Pillars
Main UK Stockists for: 3M Electrical, PFISTERER Connex, Nexans Power Cable Accessories (Euromold), Alroc, Ellis Patents, ABB, Roxtec, Cembre & CATU Electrical.
Cable Innovation Tools & Accessories for Low & High Voltage Power Systems
MV HV High Voltage Cable Joints | Cable Terminations | Cable Connectors | Distributed from Stock | UK & Export Sales
Copy & Video Courtesy of Andrew Trew | Marketing Administrator (AN. Wallis)
Copper earth bars provide a convenient common earthing point for electrical installations that require an earthing and lightning protection system, so why not send your earth bar enquiries to a company that has given blood, sweat (and a lot of) tears to a piece of software that truly breaks new ground in the world of earth bars.
Below is a 30-second video that shows the new Wallis Earth Bar Software (WEBS) creating:
· A 6-way earth bar
· Adding 2 disconnecting links
· Increasing the bar size from 50x6mm to 75x6mm
· Changing material of the hard-drawn plain copper bar to hard-drawn tinned copper bar
· Changing the base from Black PVC to Galvanised Steel to just feet
All topped off with a nice twirl at the end to give you a full 360-degree view of the earth bar.
This video only scrapes the surface of what this software can produce, and it is worth mentioning again that the below earth bar and its variations were completed well within 30 seconds! Ready to be sent to our customer for their approval. This is an internal piece of software that is used by AN Wallis staff daily to send the drawings that this software can produce for approval.
Send your earth bar challenge to Thorne & Derrick and let us amaze you with a full plan and side view upon completion along with an instant quote for your earth bar.
Earth Bar | Design & Specification & Manufacture Service
Pictured | Last month this project required 3 batches of 14 units of an earth bar with 18-way termination points and twin disconnection links for an OEM application in the industrial noise control sector. AN Wallis WEBS software was utilised to generate the above graphic concept of the finished manufactured earth bar. You can download the earth bar file here.
Further Reading
Earth Rods | Earth Tapes | Copper Earth Plates | Copper Earth Mats
THORNE & DERRICK are national distributors of LV, MV & HV Cable Installation, Jointing, Duct Sealing, Earthing & Electrical Equipment – we service UK and global businesses involved in cable installations, substation, overhead line and the installation of medium/high voltage cable joints and terminations at LV, 11kV, 33kV and HV.
Contact us for 3M Electrical, ABB, Alroc, AN Wallis, CATU Electrical, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Published 15 Oct 2025
Testimonial Organiser | EA Technology Event | Industrial Forum 2025 Title | Keeping Electrical Switchgear Safe Date | 14th October Location | Chester Racecourse By | Chris Dodds (Sales & Marketing Manager at Thorne & Derrick | Co-Exhibitor with...
Published 18 Sep 2025
Thorne & Derrick International, the UK’s leading Specialist Distributor of LV HV Cable Accessories, Tooling & Hazardous Area Electrical Equipment, are celebrating 40 years of supplying products and solutions that ensure the safety and reliability of industrial heating, lighting...
