66kV Tee Connector Nexans Euromold R909TB/G – Interface F

Euromold R909TB/G Tee Connector 66kV

➡ Now With Network Rail PADS Approval – for use in the rail industry

Euromold R909TB/G is a 66kV screened separable tee connector specified to terminate and connect high voltage power cables.

The Euromold R909TB/G tee connector with 1250A current rating is designed for Interface F and covers voltages up 72.5kV with a maximum conductor size of 1200sqmm.

Euromold R909TB/G plug-in tee connectors can be supplied as a coupling connector (R909PB) or as plug-in type epoxy bushings – all suitable for use with Interface F type bushings on SF6 gas-insulated switchgear and 66kV electrical equipment.

66kV connector accessories include: dead-end receptacle, dead-end plug, stand-off plug and earthing plug for type F bushing interfaces.

  • Manufacturer – Nexans Euromold
  • MV HV Equipment Bushing Connector – Interface F 66kV Cable Connectors
  • Maximum Continuous Current – 1250A (Amps)
  • Voltage Classes – 66kV 72.5kV Maximum
  • Terminate & Connect Cables – Polymeric XLPE EPR
  • Conductor Cross Section Sizes – 95-1200sqmm
  • Applications – 66kV Switchgear, Transformers, Motors

➡ See complete range of Nexans Euromold Connectors 

EUROMOLD R909TB/G tee Connector


Euromold Separable
Continuous Current In (A) Conductor Sizes (sqmm)
min max
R909TB/G  66kV 72.5kV 1250 Amps 95sqmm 1200sqmm
Euromold R909TB/G Tee Connector 66kV - Design

Euromold R909TB/G Tee Connector 66kV – Design

Separable tee connector comprising:

  1. Conductive EPDM insert
  2. Conductive EPDM jacket
  3. Insulating EPDM layer moulded between insert and jacket
  4. Type F interface ref. CENELEC EN 50180 and 50181
  5. Conductor connector (hexagonal crimping or bolted type)
  6. Basic insulating plug
  7. Cable reducer
  8. Conductive EPDM cap
  9. Stud + nut + washer
  10. Earthing lead
  11. Heat-shrinkable sleeve

The thick conductive EPDM jacket provides a safe to touch screen which ensures safety for personnel, cables and electrical equipment in medium/high voltage installations. The screen break design enables cable outer sheath testing without removing or dismantling the connector.

Euromold R909TB/G Selection Table

For 66kV Connectors

Select the Euromold the ordering part number which gives you the best centring of your core insulation diameter and substitute X using table X, according to the conductor size (sqmm) and type (copper or aluminium). Order Euromold MT connector kit to enable termination of copper tape screened MV-HV cables up to 66kV – suitable for copper wire screened cables.

The complete Euromold R909TB/G tee connector kit comprises the following components – cable lubricant, sealing mastic, gloves, roll adhesive tape, installation instructions and heat-shrinkable sleeve.

Kit Contents for Euromold R909TB/G Connectors

Kit Contents for Euromold R909TB/G Connectors


Euromold R909TB/G
Connector Part Number
Diameter over core insulation (mm)
min max
3 x R909TB/G-S-25-X 27 33.5
3 x R909TB/G-S-30-X 32.5 41
3 x R909TB/G-S-37-X 40 48
3 x R909TB/G-S-43-X 46.5 51
3 x R909TB/G-S-46-X 49.5 55
3 x R909TB/G-S-50-X 54 59
3 x R909TB/G-S-53-X 57 64
3 x R909TB/G-S-58-X 62.5 68


Aluminium & Copper Conductor (RMV) Copper Cable (RMV)
Bolted DIN Hexagonal Crimp
95sqmm 95.240-14-5 95(K)M-11-2
120sqmm 120(K)M-11-2
150sqmm 150(K)M-11-2
185sqmm 95.240-14-5 185.400-14-5 185(K)M-11-2
240sqmm 95.240-14-5 185.400-14-5 240(K)M-11-2
300sqmm 185.400-14-5 300(K)M-11-2
400sqmm 400.630-14-5 185.400-14-5 400(K)M-11-2
500sqmm 400.630-14-5 500(K)M-11-2
630sqmm 630(K)M-11-2
800sqmm 800.1200-14-5 800(K)M-11-2
1000sqmm 1000(K)M-11-2
1200sqmm 1200(K)M-11-2

RMV: Round Stranded Compacted Conductors

Euromold | Connect | Joint | Terminate MV HV Cables – view our complete range of HV Joints & Terminations in heat shrink, cold shrink, push-on and plug-in versions.

66kV Joints Terminations Connectors

Offshore Windfarms | 66kV Cable Joints Terminations Connectors | High Voltage Cables

Data Sheets