
Nexans | Connectors | Joints | Terminations | 11kV 33kV 66kV MV HV Cables – Interface C Symmetrical
Medium Voltage Separable Connectors & Bushings
Euromold Connectors
Up To 42kV 630Amps 800AMPS
Thorne & Derrick International distribute the complete range of Nexans Euromold Connectors for all types of medium/high voltage electrical bushings including Interface C Symmetrical according to CENELEC EN 50180 and 50181. Complete supporting range of medium/high voltage cable accessories including Euromold elbow connectors, tee connectors, coupling connectors and surge arresters are available for bushing Interface C Symmetrical equipment.
➡ See Euromold 400LB Elbow Connector and Euromold 400TB Tee Connector.


Interface C Connectors
➡ For further information about Euromold Connectors for all other Interface Bushings please see the following information:
Switchgear ♦ Transformers ♦ Motors ♦ Joint ♦ Terminate ♦ Connect ♦ Cables ♦ MV HV Bushings ♦ 11kV 33kV Medium & High Voltage
Thorne & Derrick International

11kV 33kV Terminations
T&D are Main UK Distributors for Nexans Power Cable Accessories – this includes heat shrink and cold shrink cable joints and terminations and the Euromold range of screened separable connectors extensively installed to terminate MV-HV power cables.
T&D Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV

3M Cold Shrink Joints
34.5KV XLPE 1000 KCMIL Aluminium Direct Buried For A Wind Farm With 3M Cold Shrink Cable Joint Kits


➡ 3M Cold Shrink Cable Joints suitable for jointing, connecting and splicing medium and high voltage (MV-HV) cables including 11kV, 33kV and 66kV.
Complete range of 11kV-33kV Cold Shrink Terminations are available to connect and terminate cable into switchgear, transformers and electrical equipment on MV-HV power systems.
- 11kV-33kV 3M Standard Cold Shrink Cable Joints – MV Medium Voltage
- 11kV-33kV 3M Premium Cold Shrink Cable Joints – MV Medium Voltage
- 11kV-33kV 3M Super Premium Cold Shrink Cable Joints – MV Medium Voltage
- HV Joints – High Voltage Cable Joints Using 3M Cold Shrink QSIII QS3000
- EHV Joints – 132kV Extra High Voltage Cable Joints Using 3M Cold Shrink

3M Cable Joints Terminations Cold Shrink MV HV
Should you require any assistance with the selection or specification of cable joints or terminations please do not hesitate to contact us.
Thorne & Derrick Specialist Electrical Distributor
LV ♦ MV ♦ HV
T&D distribute the most extensive range of LV, MV & HV Cable Jointing, Terminating, Installation & Cable Pulling Equipment – we service UK and international clients working on underground cables, overhead lines, substations and electrical construction at LV, 11kV, 33kV and EHV transmission and distribution voltages.
- Key Products: MV-HV Cable Joints & Terminations, Cable Cleats, Cable Spikers, Duct Seals, Cable Transits, Underground Cable Protection, Cable Jointing Tools, Feeder Pillars, Cable Ducting, Earthing & Lightning Protection, Electrical Safety, Cable Glands, Arc Flash Protection & Fusegear.
- Distributors for: 3M, ABB, Alroc, Band-It, Catu, Cembre, Centriforce, CMP, Elastimold, Ellis Patents, Emtelle, Furse, Lucy Zodion, Nexans Euromold, Pfisterer, Polypipe, Prysmian, Roxtec.

LV – Low Voltage Cable Joints, Glands, Cleats, Lugs & Accessories (1000 Volts)

MV HV – Medium & High Voltage Cable Joints, Terminations & Connectors (11kV 33kV EHV)

Cable Laying – Underground Cable Covers, Ducting, Seals & Cable Pulling Equipment
More…
T&D’s Power Blog covers: LV MV HV & EHV Transmission & Distribution, Substations, Switchgear, Cable Jointing & Termination, Cable Fault & Repair, Underground Cables.
➡ Visit Power Blog


Nexans | Connectors | Joints | Terminations | 11kV 33kV 66kV MV HV Cables – Interface C Compact
Medium Voltage Separable Connectors & Bushings
Euromold Connectors
Up To 42kV 1250Amps
Thorne & Derrick International distribute the complete range of Nexans Euromold Connectors for all types of medium/high voltage electrical bushings including Interface C Compact according to CENELEC EN 50180 and 50181. Complete supporting range of medium/high voltage cable accessories including Euromold tee connectors, coupling connectors, straight connectors and surge arresters are available for bushing Interface C Compact equipment.
➡ See Euromold 800PB Coupling Connector and Euromold 450SR Straight Connector


Interface C Connectors
➡ For further information about Euromold Connectors for all other Interface Bushings please see the following information:
Switchgear ♦ Transformers ♦ Motors ♦ Joint ♦ Terminate ♦ Connect ♦ Cables ♦ MV HV Bushings ♦ 11kV 33kV Medium & High Voltage
Thorne & Derrick International

11kV 33kV Terminations
T&D are Main UK Distributors for Nexans Power Cable Accessories – this includes heat shrink and cold shrink cable joints and terminations and the Euromold range of screened separable connectors extensively installed to terminate MV-HV power cables.
T&D Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV

Nexans | Connectors | Joints | Terminations | 11kV 33kV 66kV MV HV Cables – Interface B
Medium Voltage Separable Connectors & Bushings
Euromold Connectors
Up To 36kV 400Amps
Thorne & Derrick International distribute the complete range of Nexans Euromold Connectors for all types of medium/high voltage electrical bushings including Interface B according to CENELEC EN 50180 and 50181. Complete supporting range of medium/high voltage cable accessories including Euromold elbow connectors, tee connectors and equipment bushings are available for bushing Interface B equipment.
➡ See Euromold 400LR Elbow Connector and Euromold 400AR-8 Bushing.


Interface B Connectors
➡ For further information about Euromold Connectors for all other Interface Bushings please see the following information:
Switchgear ♦ Transformers ♦ Motors ♦ Joint ♦ Terminate ♦ Connect ♦ Cables ♦ MV HV Bushings ♦ 11kV 33kV Medium & High Voltage
Thorne & Derrick International

11kV 33kV Terminations
T&D are Main UK Distributors for Nexans Power Cable Accessories – this includes heat shrink and cold shrink cable joints and terminations and the Euromold range of screened separable connectors extensively installed to terminate MV-HV power cables.
T&D Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV

Nexans ONJC-S Onshore Junction Cabinet
Cable Cabinets
Nexans ONJC-S is an onshore junction cabinet designed, tested and manufactured for onshore renewable projects that can be used as a disconnecting point for branching between grid and applications – for applications with MV-HV separable connectors up to 42kV (630A) according to CENELEC HD 629.1 S2.
The ONJC-S onshore junction cabinet has a pedestal type powder coated ASIS 304 stainless steel housing structure, robust design with IP43 degree protection (IEC60529/EN62262 ed1:2002-02) and RAL 7037 coolcoat UV resistant coating.

33kV Onshore High Voltage Cable Junction Cabinets – Nexans ONJC-S
Nexans ONJC-S – Benefits
Medium/High Voltage MV HV Cable Cabinets
- The cable termination cabinet design is specifically suitable to be installed in outside conditions
- High accessibility for ease of installation
- Ideal test and demarcation point
- Time saving on installation and down time
- Reducing cost of installation
- Reduction of footprint

Nexans ONJC-S 33kV Onshore High Voltage Cable Junction Cabinets
Onshore Cable Junction Cabinet Comprising
- Pedestal type powder coated metal housing with keyed (europrofile cylinder) frontplate
- 2 way screened junction on stainless steel base plate and cover
- Disconnectable earth
- Tinned earth bar 5×30 mm on insulated stand offs
- Earthing connection point
- Cable cleats arrangement, up to 4 rails for max. 12 single core cables with outer cable diameter 26-52 mm
- Removable frontplate to facilitate cable access
33kV Onshore High Voltage Cable Junction Cabinets
| Nexans Onshore Junction Cabinet Part Ref |
Voltage Um (kV) |
Outer dimensions of cabinet with base (w x d x h)(mm) |
Installation |
Outer cable dia(mm)* |
| min |
max |
| ONJC-S-400J2-T1 |
42 |
770 x 470 x 1380 |
Pedestal type |
26 |
52 |

33kV Onshore High Voltage Cable Junction Cabinets – Dimensions
Cable Cleat Arrangements
| Nexans Cable Cleat Type |
Outer Cable Dia (mm) |
| ONJC-S-CLA-26-38 |
26-38 |
| ONJC-S-CLA-36-52 |
36-52 |
Options: non standard colour for powder coated housing and anti-graffitti treatment of the powder coated housing.
Nexans cables include British & European standard medium/high voltage (MV-HV) power cables for distribution of 11kV to 33kV electricity using polymeric insulated (XLPE) single or 3-core cables, with armour/unarmoured and copper wire or copper tape screen options.

THORNE & DERRICK are national distributors LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment – we service UK and global businesses involved in cable installations, cable jointing, substation, overhead line and electrical construction at LV, 11kV, 33kV and EHV.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M Electrical, ABB, Alroc, AN Wallis, CATU Electrical, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.

Invitation
Thorne & Derrick invite you to join LinkedIn’s largest LV-HV Electrical Discussion Group : Low & High Voltage Power, Cabling, Jointing & Electricals. Discussion subjects include cable installations, cable jointing, substation, overhead line and electrical construction at LV, 11kV, 33kV and EHV. Network, engage and promote your profile, company or products with over 10,000 influencers.
