Cembre RHM132 Presshead (LV 400sqmm HV 400sqmm)

Cembre RHM132 Presshead (LV 400sqmm HV 400sqmm)

Cembre RHM132 Presshead (LV 400sqmm HV 400sqmm)

Cembre RHM132 is a hydraulic presshead crimping tool complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max.

RHM132 presshead will accept die sets common to Cembre 130kN hydraulic crimping tools and is particularly suited to high volume bench crimping.

The presshead weighs 3.1kg and is supplied in a robust plastic case which is suitable for storage of the crimper head tool and 14 sets of crimping dies – used to joint and terminate lugs or connectors on LV MV HV cables including 11kV/33kV medium/high voltage electrical systems.

LV Cable Lugs Splices Insulated Terminals HV Cable Lugs Splices
400sqmm 240sqmm 400sqmm

Cembre RHm132 Presshead

User Instructions

  • The Cembre RHM132 presshead is equipped with a “self-lock” quick male coupler which can be connected to a Cembre pneumatic or electric pump
  • Select the appropriate die set for the connectors (crimp lugs or splices) for use with the presshead
  • Open the latch and release the upper die holder of the hydraulic crimping tool or presshead
  • Insert one die into the upper die holder and one die into the lower die holder
  • Close the latch on the presshead tool
  • Insert the conductor into the connector (crimp lug or splice)
  • Locate the connector between the crimping dies at the desired crimp position
  • Operate the pump to advance the main ram of the Cembre RHM132
  • Continue to operate the pump, the ram will gradually advance until crimp dies meet
  • Recommended to keep pumping until the maximum pressure valve is activated and a “click” is heard
  • After crimping completion press the release lever to release oil pressure
  • Recommend only Cembre Lugs & Connectors are used with Cembre tooling

Cembre RHM132 comes with VAL P26 plastic case.

CEMBRE RHM132 Presshead


Cembre RHM132 Presshead Specification
Tool Width 80mm
Tool Length 216mm
Crimping Force Developed 130kN
Type of Action Crimp
Weight  3.1kg
Nominal Pressure Of Presshead 700 bar


Cembre RHM132 Presshead (LV 400sqmm HV 400sqmm)

Cembre RHM132 Presshead – Hydraulic Crimping Tool

Cembre RHM132

Cembre RHM132 presshead supplied with protective carrying case, tool manual and crimp die sets


Cembre RHM130 is generally used to terminate copper or aluminium conductors during the installation of LV cable glands (up to 400sqmm) or MV HV joints and terminations (up to 400sqmm).

  • LV Cable Lugs & Splices – up to 400sqmm cable conductors
  • HV Cable Lugs & Splices (11kV-33kV) – up to 400sqmm cable conductors
  • Insulated Terminals – up to 240sqmm cable conductors

➡ For Cembre electrical connections, see Cable Crimps, Lugs & Connectors

Contact T&D to discuss crimping cables at MV-HV, including 11kV-33kV, to ensure correct Cembre tool, lug/splice and die set selection – visit battery crimping tools for repetitive crimping of cables without strain injury or worker fatigue.

Full range of battery cable cutting tools also available.


Data Sheets