Roxtec End User Cable Sealing Inlet
Roxtec End User Inlet Cable Sealing Inlets are designed for use when cables such as fibre or hybrid are installed in existing buildings where the equipment requires a high level of protection – the Roxtec cable seal prevents rodents, dust and water from entering the building and be installed in concrete walls/floors to provide quick, clean and simple cable sealing.
The Roxtec frame parts are assembled to construct different sizes and combinations of openings to accommodate and seal LV-HV cables and pipes. Suitable for installation also around existing multiple or single cables and pipes.
Roxtec round cable transit frames are used to provide a reliable cable sealing ensuring safety, efficiency and long-term operational reliability – Roxtec cable seals protect against fire, gas, water, dusts, pests, blast load and electromagnetic interference.
➡ Visit Cable Transits to view the complete range of sealing systems for cable and pipe entries on cabinets, switchgear, electrical enclosures and substations (LV 11kV 33kV 66kV 132kV) – see Rectangular Cable Seals for sealing round type cable ducts and pipe entries.
The Roxtec cable seal is designed to be installed in a drilled hole in brick or concrete wall/floor. The flange can be removed to install in angled holes. Re-installation is possible with existing cable seals.
Roxtec End User Inlet Cable Sealing
Technical Specification
Roxtec Inlet Part Number | Number of Cables | For Cable Ø | Weight (g) | For Hole Ø | Roxtec Art. No (10-pack) | ||
(mm) | (inch) | (mm) | (inch) | ||||
EUI 4-6 | 1 | 4-6 | 0.16-0.24 | 45 | 25 | 1 | 117348 |
EUI 6-8 | 1 | 6-8 | 0.24-0.32 | 41 | 25 | 1 | 117349 |
EUI 8-10 | 1 | 8-10 | 0.32-0.39 | 70 | 32 | 1¼ | 117350 |
EUI 10-12 | 1 | 10-12 | 0.39-0.47 | 68 | 32 | 1¼ | 117351 |
EUI 12-14 | 1 | 12-14 | 0.47-0.55 | 63 | 32 | 1¼ | 117352 |
EUI 14-16 | 1 | 14-16 | 0.55-0.63 | 60 | 32 | 1¼ | 117353 |