Blog

3M Dynatel | 1420 Marker Locators for Underground Cables & Utilities

3M Dynatel Electronic Marker System Locator 1420X/XE

3M Dynatel

1420 Marker Locators for Underground Cables & Utilities

3M Dynatel Locators 1420X/XE Series determines exact location of underground 3M Electronic Marking System (EMS) Markers. There are two variations of the locators 1420-iD and 1420E-iD.

3M Dynatel Locators are microprocessor-based systems that incorporate advanced digital signal processing techniques to quickly and efficiently locate underground cables and utilities even years after construction or maintenance.

This locator reads, writes and locates 3M™ iD Markers.

It locates 2 different marker frequencies simultaneously. It features a lightweight design, large display with easy-to use interface, enhanced connectivity, internal GPS module, and includes Li-Ion battery with built-in charger.

Electronic Marker System Marker Locator | 3M Dynatel

Designed to be accurate, fast and integrated allowing you to accurately and easily:

• Locate, read and write to 3M iD markers
• Pinpoint the depth and location of all existing models of properly installed underground passive EMS markers
• Conduct direct depth reading of markers
• Locate two different marker frequencies simultaneously

Advanced Features

Detect Information About Underground Utilities

A feature exclusive to the 3M 1420-iD/1420E-iD locators is the ability to read, write and lock programmed information into the 3M™ Electronic Marker System iD Markers.

Information such as a pre-programmed unique identification number, facility data, owner information, application type placement date and other details from up to 100 markers can all be stored with date/time stamp and transmitted back to your PC for enhanced resource management.

Accurate Even In Congested Areas

The 3M 1420-iD/1420E-iD locators are unaffected by metal conduit or pipe, metallic conductors, fences, AC power or electronic markers for other utilities. Multiple markers located at close proximity can be read individually using this system.

A Simple, Easy-to-use System

Lightweight and compact, the locators are rugged, ergonomic and require very little operator training. A large bright backlit digital liquid crystal display screen and soft-key operation make them easy to understand and use for more precise locates.

A “memory” feature remembers operator set-up from the previous use. A standard RS232/USB communications port allows interface to an external computer for uploading/downloading of data, unit configuration and remote software upgrades. The system is estimated to operate for more than 25 hours on eight AA alkaline batteries.

Exclusive GPS System Adds Accuracy With Ease

The 3M™ Dynatel™ Electronic Marker System Marker Locators 3M 1420-iD/1420E-iD are now compatible with select GPS/GIS field mapping instruments for real-time mapping of marker placement.

The customized Dynatel interface commands the GPS/GIS device allowing even a generalist field technician to perform real-time mapping. It’s a simple system for mapping marker placement and saving information directly into CAD and GIS systems.

The electronic export of this information in GIS format creates an automated paperless system for records updating, making positive locates in the field easier than ever.

Additional Features Include

• Large backlit, high-resolution graphic display
• PC interface via standard RS232/USB
• User-configurable features and interface
• Detects all seven EMS marker frequencies
• Locator PC tools software
• iD marker read/write capability
• Dual marker frequency search-simultaneous
• iD Marker depth estimation

3M Dynatel Technical Specifications

3M Dynatel 1420-iD

Keypad & Display Definitions

[1] On/Off (Power): Turns unit on and off.
[2] Speaker Volume Control: [2] Adjusts the volume of the locator (off, low, medium, and high).
[2A] Speaker Volume Icon: Indicates the relative volume level of the locator.
[3] Contrast: The arrows located above and below the contrast icon will adjust the contrast of the display.
[4] Gain Adjust: Adjusts the sensitivity of the locator either up or down to maintain a satisfactory signal level.
[5] Locate/OK: Sets the locator to trace mode for locating markers. Also acknowledges setup entries (OK).
[6] Menu: Displays setup screen for configuration of the unit, i.e.: clock, language, depth units, and marker data.
[7] Backlight: Toggles the backlight low, high, and off.
[8] Battery Icon: Indicates battery level.
[SK] Soft Keys: There are four soft keys (yellow keys) on the locator. The function of each key is shown above the key on the display screen. The functions will change, depending on the operation mode of the locator. For instruction purposes in this manual, the display command is followed by [SK] to identify it as a soft key.
[9] Soft Key Commands: Definitions for each of the four soft key functions.
[10] Signal Strength: Digital reading of the signal strength that the locator is detecting from the marker.
[11] Bar Graph: Graphical representation of the received signal.
[12] Gain Level: Displays relative gain level.
[13] External Jack: Not active on this model.
[l4] Serial Port: RS232 port to connect the locator to a PC via serial cable or USB-to-Serial Adapter cable.
[15] Earphone Jack: Will fit standard 1/8 inch (3.175 mm) mini-jack mono earphone plug (not included).

Ordering Information from 3M Electrical

Since 1985, Thorne & Derrick have been Approved Distributors for 3M Electrical Products (LV HV) including Cold Shrink and Scotchcast products – whilst the competitive supply of product from stock on short lead times is essential to the distributor it is equally vital that 3M product reputation is preserved through the correct installation of products in accordance with 3M recommendations.

BASEC Medium Voltage Approval Scheme & The Importance Of Surveillance Testing To Protect The Cable Industry

Medium Voltage Cables Approval Scheme

BASEC are collaborating on knowledge and content sharing with Thorne & Derrick.

T&D have been Specialist Distributors of Medium Voltage Cable Accessories since 1985 and understand the criticality of specifying and supplying Type Tested products to international standards to ensure the safety, reliability and longevity of MV power systems.

The meteoric rise in demand for digitalisation coupled to the Green Energy revolution has further fuelled industry need for MV power – if electrical power is the lifeblood of a data centre or a wind farm then cables are the main arteries.

T&D together with BASEC have a shared passion and objective to enhance electrical safety through the education and encouragement of industry stakeholders to specify and buy accredited, tested and certified MV Cables & Cable Accessories, whatever the industry.

Medium Voltage (MV) cables are used in critical applications where major failures and injuries may occur. Regulatory bodies and governments’ specific safety requirements and compliance are vital in eliminating safety-critical system failure. Product quality is usually measured through the material tests of products.

Manufacturers must conduct tests following methods specified within international or industry standards to demonstrate compliance with their materials.

Understanding material properties enables manufacturers to use materials suitable for specific end-user applications. Maintaining the quality and reliability of the finished products is also essential.

BASEC certification includes mandatory annual material testing of cable compounds. This way, a BASEC certified manufacturer can demonstrate that the same compound formula has been used. If the manufacturer changes the materials, BASEC can pick this up in surveillance testing. For the continuity of quality, routine surveillance is needed regularly to check whether the materials used are identical or not.

As technology develops and continuous innovations in material knowledge take shape, the manufacturer may need to maintain alternative formulas and suppliers for their cable design. Additionally, global material shortage reinforces this requirement.

BASEC can list those suppliers and formulas under BASEC certificates to support manufacturers and provide peace of mind to end-users. With continuous surveillance testing and audits twice a year combined with an unannounced visit to the manufacturer at random and take samples for testing.

BASEC Medium Voltage Approval Scheme

BASEC MV Surveillance Scheme vs Non BASEC Scheme

With an increased demand for energy, medium voltage networks need to provide constant power for industries and end-users. To ensure reliable network operation, continuously maintaining quality MV and HV cable products is essential.

The market typically has been primarily a singular test report, in other words, an initial Type Test or Factory Acceptance Test (FAT) at the manufacturer. It is not uncommon to encounter 5 year and older Type Test reports demonstrating their compliance onsite.

Technological developments and economic reasons each year pressure manufacturers to seek alternative designs and suppliers. The old Type Test report only demonstrates the compliance of MV cable for that single batch which is not a good indicator for today’s energy network and end-user. Although the FAT test is performed in each batch on request by the client/purchasers, it is not done in a controlled environment.

The accuracy of the test results can be questionable. The cables must be validated by an independent third party and accredited body like BASEC.

For high quality and continuous operation, BASEC provides MV cable approval to comply with local and international standards and meet end-user specifications. This protects the end-user from failure and extra maintenance costs. BASEC approved cable tests are carried out regularly – mechanical, electrical, construction and material Testing take place annually and are used in projects to operate safely for extended periods.

By certifying cables with BASEC, cables are subject to rigorous recurring tests and audits.

Thanks to these annual surveillances and testing cables direct from the market, end-users and contractors ensure their systems’ reliability by specifying BASEC approved cables in their projects.

By doing the above surveillance, BASEC can certify a range of cables as specified in the standards, saving costs when getting the approval instead of testing each cable individually. Providing the cables pass the initial type tests and are under surveillance schemes such as BASEC approval.

The importance of accredited lab testing vs manufacturer own type tests and what this means to the market and users for safety

By accredited to ISO/IEC 17025 through an independent, impartial accreditation body, laboratories demonstrate their technical competency, laboratory quality, performance, reliability, and efficiency to ensure the accuracy of the test results. There is always the risk that unaccredited test laboratories can produce different test results.

This can be a result of equipment use, environmental factors, staff competency, and uncalibrated and unmaintained types of equipment. To avoid these different results and to ensure the test’s accuracy, ISO/IEC 17025 accreditation must be followed by labs as a regulating reference.

As mentioned above, in-house generated manufacturer test reports are more prone to uncertain human and equipment errors. BASEC’s ongoing surveillance scheme continuously checks the cables’ conformity to ensure the quality has not dropped from the first set of initial Type Testing. This gives the manufacturer product approval for a cable; before they can mark it with the BASEC Quality Mark. When placed on the market, this then gives purchasers confidence in the ongoing quality and conformity of the product.

BASEC has an independent cable laboratory accredited by UKAS against ISO/IEC 17065 for Product Certification, against ISO/IEC 17025 for Testing, and ISO/IEC 17021-1 for Quality Management Systems Certification and Environmental Management Systems Certification.

BASEC labs are recognized under the European Accreditation Multilateral Agreement (EA MLF), the International Laboratory Accreditation Cooperation (ILAC), and the International Accreditation Forum (IAF), as well as being UKAS Accredited.

Testing your cables at BASEC accredited labs provides you with validated test results globally. Cables tested and approved by BASEC accredited to ISO/IEC 17025 are placed on the market and can be specified in projects confidently.

To read the original article please click here – https://www.basec.org.uk/news/2022/9/7/basec-medium-voltage-surveillance-scheme-vs-non-basec-scheme-the-importance-of-cable-material-testing/

About Basec

BASEC is a global leader in cable testing and certification services for power, energy, data/signal cables and ancillary products, alongside quality management systems.

Operating independently for over 45 years, the BASEC mark is trusted for quality, clarity and impartiality.

BASEC’s teams of highly skilled engineers, technicians and auditors possess extensive in-depth commercial, industrial and technical experience. As a result, BASEC has a reputation for professional and rigorous assessment processes which ultimately lead to the issuing of our highly respected product certifications and test reports.

In addition, BASEC offers a number of supporting services for cable makers, traders and users, including management system certification, bespoke type testing, impartial investigation of conformity issues and testing and reporting in the event of disputes. Furthermore, Certificates of Assessed Design are available for innovative cable products.

Thorne & Derrick are national distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment – this includes 3M Cold Shrink, Nexans Euromold and Pfisterer CONNEX Cable Accessories for Medium Voltage Power Systems.

We service businesses involved in cabling, jointing, substation, earthing, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV. Supplying a complete range of power cable accessories to support the installation and maintenance of low/medium and high voltage voltage power systems:

• Slip-on Cable Terminations
• Cold-shrink Cable Terminations
• Heat-shrink Cable Terminations
• Cable Joints – Heat & Cold-shrink
• Separable Connectors (Euromold)
• Surge Arresters & Switchgear/Transformer Bushings

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

JTS by Nexans | A modern generation of MV Cable Joints have been developed by Nexans for the UK utility and contracting industry – the primary application of JTS Joints is for the jointing of 11kV 24kV and medium voltage power cables up to 33kV/42kV.

September 2022 VOLTS!

THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt

Welcome to our initial industry bulletin – VOLTS.

So what is VOLTS?

VOLTS is our first monthly round-up of industry news, projects, videos, technical tips, training information, promotions, webinars and career opportunities from Thorne & Derrick. Take a moment to Follow Us on LinkedIn to receive future VOLTS.

In The News

Net Zero Teesside

Net Zero Teesside Power (NZT Power) will be the world’s first commercial scale gas-fired power station with carbon capture, and the hub of a decarbonised group of industries on Teesside who will share the CO2 transportation and storage infrastructure being developed by the Northern Endurance Partnership to serve the East Coast Cluster.

Net Zero Teesside Power’s proposed combined cycle gas turbine electricity generating station will have an electrical output of up to 860 megawatts (MW) of low carbon electricity, enough to power up to 1.3m homes per year.

From the power plant alone, the proposed carbon transportation and storage infrastructure will capture and store up to two million tonnes of CO2 a year.

These proposals help support the UK government’s commitment to fully decarbonize the power system in the UK by 2035 and will help to enable greater deployment of renewable energy such as wind and solar by providing flexible, dispatchable low carbon electricity generation which backs up intermittent renewables – crucial for periods when the wind isn’t blowing, and the sun isn’t shining.

In January 2022, an exciting partnership was agreed with NOF, a regional business development specialist for the energy sector, to support supply chain engagement.

➡ Read The Full Article

A Record Sales Year!

In this record sales year for Thorne & Derrick we have now signed Strategic Supplier Frameworks for MV/HV Cable Accessories & Tooling with 4 multinational power companies whom provide the global drive and expertise to continue the path to a sustainable Green energy future.

This week we have achieved Approved Supplier Status to Nordex Group and are now delivering a 33KV Cable Accessory & Electrical Safety package to their Oweninny Wind Farm.

As a leading supplier to the electrical sectors of diverse industries, we support customers by providing specification and Jointer Training Services plus competitive product supply from extensive stocks to UK, EU and International projects.

pROJECTS & NEWS

T&D Deliver Essential Equipment With Same Day Turn Around

Thorne & Derrick are profficient in the supply of solutions that are best suited to the intended application, including the fast replacement of incorrect equipment where necessary, to ensure that clients are able to complete required jobs on time.

This month we organised same day delivery for some SPS outdoor terminations and 2 hole 630sqmm Cembre lugs to replace equipment that was not appropriate for the client’s application. The client previously ordered indoor terminations and single hole cable lugs which were incorrect for the job at hand. The fast delivery of equipment to the client enabled the workers on site to continue with work as normal without delay.

Cable Joints & Terminations

Thorne & Derrick distribute the most extensive range of MV HV Medium & High Voltage Cable Joints, Terminations & Connectors from manufacturers including 3M, Prysmian, Nexans Euromold, Elastimold, Pfisterer CONNEX & SEANEX and Shrink Polymer Systems for use up to 66kV.

Powering Power Stations

We are delighted to have assisted a combined cycle gas turbine power station this month with the specification and supply of Pfisterer Connex Connectors which were needed urgently to ensure energisation of the site on their deadline day. With extensive UK stocks, Thorne & Derrick were able to deliver the required products to the customer quickly.

Pfisterer MV HV cable connectors and terminations are suitable for all voltage levels and applications where medium or high voltage power cables must be reliably connected, terminated and distributed within the electricity supply industry.

A Combined Cycle Gas Turbine

The CCGT Power Station comprises of a single natural gas fired turbine with an associated heat recovery boiler, a single steam turbine, an electrical generator and a steam condensing and cooling system. The latter uses water from the River Calder in a once through cooling system which discharges back to the river. The exhaust gases are discharged to atmosphere through 30 m tall stack. The station has a net thermal input of 106 MWth and provides an electrical output of 50 MWe in combined mode.

Unlocking The Possibility Of EV Ownership

Working with EZ-CHARGE, Lucy Zodion are delighted to have been involved in the Oxfordshire County Council Park and Charge initiative 🚗🔌

Park and Charge Oxfordshire is an innovation project, grant funded by the Office of Zero Emission Vehicles (OZEV).

The aim: to unlock the possibility of EV ownership for tens of thousands of residents by providing up to 250 new EV charge points, within 20 car parks, across Oxfordshire towns and villages.

Throughout the project, Lucy Zodion supplied a total of 20 EV pillars featuring O-PEN technology, a real game-changer for both operators and installers, as you don’t have to install earth rods – saving time and money! The Park and Charge is now officially open, to the delight of local residents, businesses and community groups who have been eagerly waiting for charging infrastructure in the town.

EV Charging Pillars

Thorne & Derrick design and supply feeder pillars to projects daily across the globe, including to EV projects to meet the increasing demand for accessible Electric Vehicle charging points.

Lucy Zodion manufacture a wide range of products suitable to provide Low Voltage Electrical Power Distribution for EV charge points – from distribution network operator (DNO) accredited cut-outs and isolators for on-street chargers, to feeder pillars for electrical vehicle charging. The standard range of pillars have been adpted to support EV charge point requirements that fall into the four categories of main current rating: 100 Amp, 200 Amp, 400 Amp and 630 Amp, providing a link between the DNO and EV charge points.

The configuration of all EV feeder pillars in this range can be upgraded once installed to meet future demand requirements. Contact Thorne & Derrick for further information.

EV Charging Feeder Pillars & Enclosures

RIDGID RP 351 Press Tool Wins Award!

The Dealer Design Awards by ACHR NEWS recognise products used by professional contractors with features that assist in installation, maintenance, and service of installed products to the HVACR industry. RIDGID is honoured to have been awarded a Gold Dealer Design Award for the RP 351 Press Tool 🥇

The RP 351 Inline Design Press Tool is designed for speed and continued operation in the most confined spaces. Optimally balanced for one-handed use and reduced jobsite fatigue. Driven by the new RIDGID Brushless Motor Technology, RP 351 reaches over 100,000 press cycles and requires no scheduled maintenance.

➡ See also the RIDGID RP 350 Press Tool, which is compatible with the NEW STRUTSLAYR

Compatible with RIDGID 32kN press tools*, the STRUTSLAYR strut cutter offers reduced risk sparking when compared to grinders and chop saws and still manages to produce a clean, consistent cut just by pulling the trigger.

A day in The Life Of An Electrical Engineer

STRATA, specialists in Arc Flash Clothing & Protection Kits, have been working behind the scenes, connecting and collaborating with their client base to create brand new content series that highlights the raw activities that go on each day within the Energy Sector.

They are proud to officially launch their new STRATA® Protection Series with ‘The Day in the Life of an Electrical Engineer’ in collaboration with Anesco Ltd.

Meet Gheorghe. Gheorghe works at Anesco as a High Voltage Appointed Person and Technician on solar farms and battery energy storages. Watch as we follow Gheorghe across the solar wind farm and see how a faulty inverter is replaced and much more.

Thorne & Derrick understand how critical it is to have reliable, highest quality personal protection equipment (PPE), clothing and workwear available from stock at competitive prices – protecting utility workers against arc flash dangers posed during maintenance on underground electric cables, overhead line conductors or electrical equipment.

Technical Tip

LIGHT UP ANY SITUATION WITH A PRACTICAL SOLUTION

The CEMBRE CBLIGHT (CBL) series offers a complete range of LED lights: highly practical and functional torches, lamps and portable spotlights.

Compact and easy to use, the CBLIGHT series lights are a practical solution in any situation where quick and efficient wireless lighting is required.

The range consists of COMPACT, PORTABLE, FLOOR AND TABLE TOP devices:

• EFFICIENT, COB (chip on board) LED technology
• BRIGHT, 150-3000 lumens
• LOW CONSUMPTION, from 2.5-10h battery life and high energy rating
• ERGONOMIC and lightweight, bi-component plastic handles
• PRACTICAL, double light point, with adjustable magnetic support and built in suspension hook
• ALWAYS READY with wireless charging
• FUNCTIONAL as a power bank

SECTOR SPOTLIGHT | BATTERY STORAGE

Thorne & Derrick, Specialist UK Distributors of LV HV Jointing, Earthing, Substation & Electrical Eqpt up to 66kV, provide expert technical specification, customer support and product supply from stock of an extensive range of Hazardous Area Electrical Equipment – this includes Power, Heating & Lighting products with ATEX Certification for installation in Substation Battery Rooms.

♦ Lighting – T&D can provide lighting designs to ensure lux levels are achieved in line with regulations, fittings are located correctly and meet certification requirements – we provide a comprehensive hazardous area lighting system design service.

♦ Heating – T&D can provide battery room heat loss calculations to ensure the correct heaters are specified and meet ATEX certification requirements to provide adequate comfort heating to the substation.

♦ Power – T&D can specify and supply from stocks Joints & Terminations for the connection and energisation of high voltage power cables to switchgear and transformers up to 66kV.

• Raytec | Light Fittings
• Abtech | Junction Boxes
• Craig & Derricott | Isolators
• EXHEAT | Heaters
• Marechal | Plug & Sockets
• Crowcon | Gas Detectors
• Technor | Enclosures & Control Equipment
• Roxtec | Cable Transits
• Hawke | Cable Glands
• ATEX PIR’s

VOLTS! By,

Thorne & Derrick distribute the most extensive range of Low & High Voltage Cable Installation & Electrical Distribution Equipment to the Power Transmission & Distribution industry in the onshore and offshore wind, solar, rail, oil/gas, data centre, battery storage and utility sectors – this includes Joints, Terminations & Connectors to enable the installation of low, medium and high voltage power cables into underground trench or duct.

Key Product Categories: Connectors, Joints & Terminations MV HV | Cable Preparation & Jointing Tools | Duct Seals | Cable Transits | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Clothing & Protection | Cable Pulling | Earthing & Lightning Protection | Feeder Pillars

Main UK Stockists for:  3M Electrical, PFISTERER Connex, Nexans Power Cable Accessories (Euromold), Alroc, Ellis Patents, ABB, Roxtec, Cembre & CATU Electrical.

CEMBRE CBLIGHT | LED Portable Lighting for Electrical Contractors

CEMBRE CBLIGHT

Cembre is a leading European manufacturer of electrical connectors, crimping tools, cutting tools and a variety of accessories for LV (Low Voltage), MV (Medium Voltage) and HV (High Voltage) power systems. Designed for switchgear and control panels, Cembre tools are ideal for installing low and medium voltage connectors.

The CEMBRE CBLIGHT (CBL) series offers a complete range of LED lights: highly practical and functional torches, lamps and portable spotlights.

Compact and easy to use, the CBLIGHT series lights, manufactured by Cembre, are a practical solution in any situation where quick and efficient wireless lighting is required.

The magnetic supports make CBLights useful for all outdoor activities, on construction sites and in emergency situations, ideal in the car, at home or in the office.

The built-in rechargeable battery guarantees durability and low consumption thanks to lithium polymer cells (Li-POLY), more advantageous than traditional lithium-ion (Li-ION) cells.

The high IP protection combined with the solid shockproof and non-slip rubber construction make the CBL series extremely robust and safe.

Min operating temperature range – 14 °F

Max operating temperature range – 104 °F

CEMBRE CBLIGHT (CBL) Range

WHY CHOOSE CEMBRE CBLIGHT?

The range consists of Compact, Portable, Floor & Table and Table Top devices.

• EFFICIENT, COB (chip on board) LED technology
• BRIGHT, 150-3000 lumens
• LOW CONSUMPTION, from 2.5-10h battery life and high energy rating
• ERGONOMIC and lightweight, bi-component plastic handles
• PRACTICAL, double light point, with adjustable magnetic support and built in suspension hook
• ALWAYS READY with wireless charging
• FUNCTIONAL as a power bank

Cembre CBLIGHT Technical Data

Contact Thorne & Derrick for more information.

THORNE & DERRICK

T&D are Specialist Distributors of LV MV HV Cable Installation, Jointing, Substation & Electrical Equipment – we supply companies in the onshore and offshore wind, solar, rail, oil/gas, data centre, battery storage and utility sectors with products to enable the energisation, operation and maintenance of underground cables and overhead lines.

Products | Surge Counters | Sealing Cable Ducts | Cleats, Clamps & Hangers | LV MV HV Electrical Safety | Arc Flash Clothing & PPE | Jointing, Termination & Stripping Tools | Cable Pulling & Laying | Feeder Pillars | Cold Shrink | Heat Shrink | Joints Terminations Connectors MV HV

Cable Installation & Cable Socks For Renewable Energy Sector

Working with Slingco we have produced engineered and customised solutions using cable grip and support innovation to major cable laying contractors for the connection of wind farm projects globally.

Cable Installation & Cable Socks

Thorne & Derrick together with Slingco offer pulling and supporting to power & subsea cables in the wind sector. Slingco have developed a comprehensive range of cable grips (commonly referred to as cable socks) specifically tailored to the needs of the renewable energy sector.

The marine pulling grips are the for installation of inter-array and export cables for offshore wind farms. There are grips to suit common cable sizes used in offshore applications and have increased break loads.

The cable socks also feature a new ‘two over / two under double weave’ on the lattice which tightens up the angle of deflection over the end of the cable.

Together we can offer an extensive range of marine and hose restraint cable grips for onshore and offshore cable installation, including the support of cables inside wind turbines and general cable management.

SLINGCO MARINE cable socks Features

• Cable range of 90mm to 355mm
• Break load tested and independently witnessed at Lloyds Register
• Manufactured to high quality standards in the UK
• Length standardised from 2.5m to 3.5m

Marine cable socks are designed, manufactured and tested to exacting standards to ensure safe and reliable operation under the most challenging condition

WHY SLINGCO FOR MARINE GRIPS?

• UK manufacturing facility produces between 2,500 to 6,000 grips per month from our new 32,000sqft, state of the art premises
• Options such as Thimble eye, Shoulders, and Anodes are now available on request (manufactured to order), as are stainless steel and aramid, both of which have better corrosion resistance for prolonged subsea lay down durations
• Range of non metallic grips made from high strength aramid fibre, with UV protective coating, ideal for fibre optic offshore applications
• An impeccable track record, with recent projects including: Kincardine, EastAnglia 1 & 2, Borssele 1 & 2, Hornsea 1 & 2, Akita, Triton Knoll, Moray East, St Nazaire, Dolwin 6, Ostwind 2, Formosa 2, Thanet, Walney, Gwynty Mor, Dogger Bank, Park Wind

Every Slingco product is designed, manufactured and tested to exacting standards to ensure safe and reliable operation under the most challenging conditions. From initial product design to technical support and customer service, we are your trusted partner.

Cable Pulling & Laying Equipment

Suppliers & Distributors

Thorne & Derrick distribute the most extensive range of Low & High Voltage Cable Installation & Electrical Distribution Equipment to the Power Transmission & Distribution industry in the onshore and offshore wind, solar, rail, oil/gas, data centre, battery storage and utility sectors – this includes the most extensive range of Cable Pulling & Cable Laying Equipment to enable the installation of low, medium and high voltage power cables into underground trench or duct.

We service UK and international clients working on underground cables, overhead lines, substations and electrical construction at LV, 11kV/33kV and up to EHV transmission and distribution voltages.

Key Products: MV-HV Cable Joints & Terminations, Cable Cleats, Duct Seals, Cable Transits, Underground Cable Protection, Copper Earth Tapes, Cable Jointing Tools, Feeder Pillars, Cable Ducting, Earthing & Lightning Protection, Electrical Safety, Cable Glands, Arc Flash Protection & Fusegear.

Distributors for: 3M Electrical, ABB, Alroc, Band-It, Cembre, Centriforce, CMP, Elastimold, Ellis Patents, Emtelle, Furse, Lucy Zodion, Nexans Euromold, Pfisterer, Polypipe, ProGARM, Prysmian, and Roxtec.

• Scope –single-source supply of extensive range of products
• Stock – a multi-million pound stock holding provides complete global supply solutions
• Staff – technical support from a trained, proactive and friendly team
• Delivery – UK stock turnaround with express logistics to all international destinations

Further Reading | Cable Drum Handling & Laying Cables | A Guide from Nexans