Cable Joints & Terminations LV

3M Scotchcast Cable Splicing & Jointing Kits Supplied For Marine & Offshore Cables

• uploaded by Chris Dodds | Thorne & Derrick Sales Marketing Manager

Cable Repair, Splicing & Jointing

Thornre & Derrick stock and supply marine salvage and shipwreck removal contractors with 3M Scotchcast 82F submersible cable splicing and jointing kits for connecting flexible marine cables onboard vessels.

The cable repair solution features seawater resistant and flexible 3M Scotchcast 2131 resin which provides stable performance in offshore seawater exposed locations without comprising the flexibility of cable circuit.

REPAIR & JOINT SUBMERSIBLE CABLES

Thorne & Derrick International, based in the UK, distribute an extensive range of Offshore Cable Joints to suit halogen free (zero halogen), flame retardant, MUD resistant, heat resistant and fire resistant offshore and shipboard power, control and instrumentation cables.

3M Scotchcast Flexible Power Cable Splicing Kits 82-F and 82-BF Series are flexible inline and tap splices for use on non-shielded portable power cables and cords. The cable splices are designed to be used on single or multiple conductor cables, depending on the voltage rating.

Submersible Cable Joints – 3M Scotchcast 82F 82BF Cable Splicing Kits – Dimensions

3M SCOTCHCAST 82-F2 FLEXIBLE POWER CABLE SPLICING KITS

1. One-piece removable cable joint mold
2. 3M Scotchcast 2131 resin compound in “Unipak” container
3. 3M Scotch 23 tape for sealing cable joint mold ends
4. Clear and comprehensive cable jointing instructions

Thorne & Derrick also supply marine contractors with 3M Scotchcast 2130 and 2131 resins to enable cable jacket repair using flame retardant electrical insulating resins

3M Scotchcast 2131 Resin Features

• Excellent adhesion to plastics and metals
• Bonds to itself as well as most modern cable jackets
• Tough, flexible and flame retardent
• Excellent hydrolytic stability
• Low exothermic reaction temperature

3M Scotchcast 2130 Resin Features

• Flame retardant
• Bonds to all modern cable jackets
• Bonds to itself
• Tough yet flexible
• Unipak container for mixing and pouring
• Excellent multipurpose moisture sealing resin

3M Scotchcast Resins from 3M Electrical Markets Division | Cable Jointing Resins

3M Scotchcast 2131 Resin – Offshore Application 

Flame retardant mechanical protection and electrical insulation of flexible low voltage electrical joints installed for flame retardant indoor and outdoor, underground and submerged applications. 2131 resin can be used to replace or repair cable jackets for both single and multi core power cables. Suitable for sealing the crutch and/or sheath when terminating multi core cables.

T&D are 3M Electrical Products stockists for their complete range of cable accessories including Scotchcast resins, Scotchcast cable joints, Cold Shrink cable joints, Cold Shrink cable terminations and Scotch tapes.

LV Cable Joints (Low Voltage Cables)

Thorne & Derrick stock and distribute LV Joints in Cold Shrink, Heat Shrink or Resin Cast technologies – multicore and multi-pair cable joints are available for immediate backfill and energisation of Low Voltage power, control and instrumentation cables 600V/1000V 3.3kV.

Complete range of LV Cable Accessories  ➡

Cable Breakouts | Cable Caps | Cable Lugs | Cable Cleats | Cable Trough | Cable Duct | Feeder Pillars | for 11kV/33kV/66kV networks see MV HV Joints & Terminations

Pfisterer | Nexans Euromold | Prysmian | Cable Joints & Terminations MV HV

Cold Shrink by 3M | Joints | Abandonment | Terminations | Low Voltage LV Cables

Jointing Of Waveform Distribution Mains & Service Cables

Waveform Cables 3 Core & 4 Core BS7870-3.402011

• uploaded by Chris Dodds | Thorne & Derrick Sales Marketing Manager

Accessing Phase, Neutral & Earth Conductors

3 & 4 Core Waveform Cables are in widespread service throughout the UK DNO network – these type of cables must be stripped in accordance with the appropriate Approved Cable Jointing Instruction issued by the network DNO.

Often waveform cables are jointed live :

1. Remove outer PVC cable sheath using insulated cable stripping knife
2. Remove the soft unvulcanised rubber, if present, in which the neutral/earth or earth wires are embedded using an insulated Sicame Hepnfy
3. Lift the neutral/earth or earth wires using an insulated core seperator from the inner rubber bedding
4. Remove the inner unvulcanised rubber from the cores using an insulated Sicame Hepnyf

Steps 1 to 4 are excerpted from SP Energy Networks, LWM Low Voltage Cable Jointing Issue 6 OPSAF-12-011 Manual. 2010.

Ad: Insulated Tools (Live Line & Cable Jointing Tool Sets) – T&D supply a full range of insulated tools kits for electrical engineers, cable jointers and overhead linesmen

The fully insulated Sicame Mini-Hepnyf has been developed to compliment the standard Hepnyf and has a particular beneficial application in the stripping of lead sheath from small PILC service cables by the cable jointer – the jointers knife can also be used for the removal of mastic bedding on all types of waveform cables.

Using the correct tools to prepare industrial and utility cables before cable jointing and terminating reduces catastrophic cable failures.

LV-HV cable jointing tools enable cable preparation, stripping and cutting of insulation (XLPE, EPR), semi-conductive screens (bonded and peelable) and cable sheaths (PVC, PE, EPR) from single and multi-core cables.

LV Cable Joints (Low Voltage Cables)

Thorne & Derrick stock and distribute LV Joints in Cold Shrink, Heat Shrink or Resin Cast technologies – multicore and multi-pair cable joints are available for immediate backfill and energisation of Low Voltage power, control and instrumentation cables 600V/1000V 3.3kV.

Complete range of LV Cable Accessories  ➡

Cable Breakouts | Cable Caps | Cable Lugs | Cable Cleats | Cable Trough | Cable Duct | Feeder Pillars | for 11kV/33kV/66kV networks see MV HV Joints & Terminations

Pfisterer | Nexans Euromold | Prysmian | Cable Joints & Terminations MV HV

Cold Shrink by 3M | Joints | Abandonment | Terminations | Low Voltage LV Cables

Heat Shrink Cable Repair Kits For Damaged BS6883 Offshore Cables

Heat Shrink Cable Repair Sleeve Kit

• uploaded by Chris Dodds | Thorne & Derrick Sales Marketing Manager

Working with Anixter, Thorne & Derrick are supplying heat shrink cable sheath repair kits to reinstate and repair cable damage to BS6883 offshore cables (600/1000 volts low voltage) – during installation of the offshore type cables (BS6883) the bending radius was exceeded causing stress cracks and splits on the EPR rubber insulation.

The lay-flat wrap-around design of heat shrink cable repair kits enable fast and reliable repairs to cable damage without resort to cable jointing or electrical circuit isolation.

The damaged cable can be repaired mid-circuit without resort to disconnection of the cable at the point of cable gland or cable termination. The damaged cables with an outside diameter of 19mm are to be repaired using 250no lengths of pre-cut sections of SPS SWRS 50-15 heat shrink repair kits.

The dielectric strength of a wraparound repair sleeve is minimum 11kV-12kV per mm of thickness and after recovery the heat shrink will provide a 2mm wall thickness.

This level of re-insulation is sufficient to seal and protect the cable and provide some additional insulation. However, whilst a heat shrink wrap sleeve is an excellent choice to repair low and high voltage cables, if any damage to the conductive screen or primary insulation on high voltage cable is evident, removing the damage and fitting a cable joint would be the recommendation.

Heat Shrink Cable Repair Kits

SPS SWRS Specification

Pictured : BS6883 Offshore Cable – Typical Cable Construction – EPR Rubber Insulated Cables 600/1000 Volts

How to Install Wraparound Repair Sleeves

1. Position the wraparound sleeve over the cable damage, joint or splice and close the metal channel
2. Apply heat using the heat shrink gas torch to shrink the sleeve onto the cable sheath and melt the adhesive liner
3. The finished sleeve is allowed to cool creating moisture proof and corrosion resistant cable seal

T&D are the largest UK distributor for SPS (Shrink Polymer Systems) and stock an extensive range of SPS 11kV and 33kV heat shrink cable joints and cable terminations.

LV Cable Joints (Low Voltage Cables)

Thorne & Derrick stock and distribute LV Joints in Cold Shrink, Heat Shrink or Resin Cast technologies – multicore and multi-pair cable joints are available for immediate backfill and energisation of Low Voltage power, control and instrumentation cables 600V/1000V 3.3kV.

Complete range of LV Cable Accessories  ➡

Cable Breakouts | Cable Caps | Cable Lugs | Cable Cleats | Cable Trough | Cable Duct | Feeder Pillars | for 11kV/33kV/66kV networks see MV HV Joints & Terminations

Pfisterer | Nexans Euromold | Prysmian | Cable Joints & Terminations MV HV

Cold Shrink by 3M | Joints | Abandonment | Terminations | Low Voltage LV Cables

3M Scotchcast Cable Joints for Branch Jointing LV XLPE PILC Power Cables

Branch & Straight Joints | LV Cables

• uploaded by Chris Dodds | Thorne & Derrick Sales Marketing Manager

Scotchcast Cable Joints

Branch Jointing Cables

3M Electrical branch cable jointing kits using Scotchcast resin are certified to BS-EN 50393:2006 – armoured and unarmoured LV branch cable joints complete with mechanical shearbolt connectors are available from stock.

Branch joints are encapsulated with two-part resin for electrical insulation and mechanical protection. Low voltage branch joints are suitable for both cut and uncut mains XLPE or PILC insulated power cables. For applications up to 1000 volts, the cable joints may be resin filled under load conditions.

Sicame Connectors

Connectors

Sicame connectors feature shearbolt technology for fast, simple cable jointing without resort to compression tooling and associated die sets – ideal for cable jointing metric to imperial, dissimilar sized and type conductors.

Cable Joint Connectors

Service branch and mains cables can be 2, 3 or 4 core cables – branch joints can be supplied without requiring the mains cable to be cut (“uncut mains”) using the appropriate shearbolt mechanical connectors.

Armoured Cables

Earth continuity across wire armoured or braided cables is achieved by using copper earth braid and constant force springs.

Thorne & Derrick stock the full range of 3M Scotchcast Resin Branch Cable Joints for 600/1000V low voltage cable jointing applications for installation underground, overground or underwater – this includes both polymeric (XLPE) and paper (PILC) insulated cables.

Scotchcast

3M Scotchcast Branch Joints are easy to install by the jointer, cost effective and time efficient for reliable power cable jointing to repair and maintain LV electrical distribution systems.

The branch resin cable joints have a one part mould body construction and a unique top seal and fixing clips, making the installation process simpler and reducing the chance of resin leakage. The LV resin joints have foam seals at each end of the mould body meaning there is no need for sawing or taping.

Resin cable joints specially modified for oil, petrochemical, gas, mines, telecoms, rail and industrial cables are available – suitable for direct burial (underground), water immersion, hazardous area zone location or onto cable containment.

• Straight/Inline
• Branch (T or Y)
• Multi-Service
• Transition
• Pot-end Joints

3M Scotchcast Low Voltage LV Resin Branch Cable Joints Kits

• One part cable joint mould construction – quick simple installation
• Top seal and fixing clips – reduced chance of resin leakage from joint shell
• Range taking foam seals – no taping or sawing
• Fully integrated resin joint delivery – safer, cleaner installation of cable joints
• Complete with 3M Scotchcast premium 2 part cable joint resin
• Branch cable joints rated up to and including 1.9/3.3kV

3M SCOTCHCAST LV RESIN CABLE JOINTS

Specialist cable joints using 3M resins are available for extreme operating conditions and hazardous area zone locations with resistant to flame, fire and hydrocarbons:

Resin Cable Joints – Features & Benefits Of 3M Scotchcast Cable Jointing Systems

LV Cable Joints (Low Voltage Cables)

Thorne & Derrick stock and distribute LV Joints in Cold Shrink, Heat Shrink or Resin Cast technologies – multicore and multi-pair cable joints are available for immediate backfill and energisation of Low Voltage power, control and instrumentation cables 600V/1000V 3.3kV.

Complete range of LV Cable Accessories  ➡

Cable Breakouts | Cable Caps | Cable Lugs | Cable Cleats | Cable Trough | Cable Duct | Feeder Pillars | for 11kV/33kV/66kV networks see MV HV Joints & Terminations

Further Reading

• 3M Scotchcast Flexible Cable Joints – Port Authority & Container Handling Industry
• 3M Scotchcast Cable Joints For Type 11 Flexible & Trailing Mining Cables
• 3M Scotchcast Cable Joints – Your Cable Circuit Is Only As Strong As Its Weakest Link

Pfisterer | Nexans Euromold | Prysmian | Cable Joints & Terminations MV HV

Cold Shrink by 3M | Joints | Abandonment | Terminations | Low Voltage LV Cables

3M Scotchcast Flexible Cable Joints Within The Port Authority & Container Handling Industry

• uploaded by Chris Dodds | Thorne & Derrick Sales Marketing Manager

3M Scotchcast

Flexible Cable Joints

The port authority and container handling industry is a key component in the backbone of the British economy. Directly employing 117,200 workers, contributing £7.9 Billion to the UK economy and providing £2 Billion in taxes as reported by Oxford Economics.

It is therefore essential that the industry runs in an efficient and seamless manner.

The uninterrupted supply of electrical power as well as and the redevelopment and expansion of ports around the UK means there are many kilometers of LV cable being used within the shipping industry.

Cable Joints

Conductix-Wampfler Flexible Cables – Maintaining Their Flexibility With 3M M20, M30 And M40 Cable Joints

Cables

Conductix-Wampfler are manufacturers of flexible LV cables used within the port authority and container handling industry. Cables are typically stored on large cable reels meaning they must be intrinsically flexible. This allows the cable to be reeled around a drum and re-coiled when required.

The cables have a multitude of special features, all of which enable the cables to be used effectively and efficiently within the industry. These features include:

• An outer sheath with extreme resistance to aggressive environments
• Very high resilience due to a very short lay stranding
• High axial rigidity thanks to interlinked inner and outer sheaths
• Great resistance to corkscrew due to reverse twist stranding
• Stable construction and geometry based on extruded fillers

Conductix Wampfler Flexible Cable Reels

When multiple lengths of cable are being jointed together, it is imperative that their flexibility and bend radius is not compromised by the cable joints being used. The 3M Scotchcast M Series of cable joints and repair kits are a flexible, cold pour resin system designed for the permanent jointing and repair of flexible cables – this includes single and multi-core LV power cables.

Jointing Cables

Once installed, the 3M Electrical flexible cable joint using Scotchcast resin provides a waterproof seal that will not be compromised during cable installation. The flexiblity of the 3M Scotchcast M20, M30 and M40 range is such that they will remain intact and continue to perform during frequent coiling of the cables and direct burial or submerging of the joint.

Conductix Flexible Cables In The Shipping Industry

Other benefits of the 3M Flexible Cable Jointing And Repair System include:

• Simple installation
• Non-vulcanising meaning no cost equipment is needed to install
• Drastic reduction in repair times compared to vulcanising
• Safer system due to the fact no heat is required to install the joint
• High performance (can be reeled without the risk of sagging)
• Provides a permanent joint/repair
• Flame retardant resin

3M Flexible Cable Jointing And Repair System

Flame, weather and abbrasion resistant, the 3M M20, M30 and M40 flexible cable joints are easy to install and available in a range of 3 sizes as shown below and are suitable for use on cables ranging from 40mm O/D up to 150mm O/D.

The resin to be used with this kit is supplied separately and only the 3M 2130 Flexible Resin is suitable for use with this range of kits. 

3M Scotchcast Flexible Cable Jointing and Repair System Specifications

Kit No	Cable Size – Min (mm)	Cable Size – Max (mm)	Max Length Of Joint (mm)	Mould Length (mm)	Quantity Of Resin Needed For Joint (Grammes)
M20	40	63	360	510	1200 (2xC Size Packs)
M30	47	100	520	740	2220 (3 x C & 2 x B Size Packs)
M40	27	150	813	1118	3600 (6 x C Size Packs)

Video: Conductix Wampfler Pre Assembled Festoon Systems – Fast & Easy Installation/Retrofit On-Site

LV Cable Joints (Low Voltage Cables)

Thorne & Derrick stock and distribute LV Joints in Cold Shrink, Heat Shrink or Resin Cast technologies – multicore and multi-pair cable joints are available for immediate backfill and energisation of Low Voltage power, control and instrumentation cables 600V/1000V 3.3kV.

Complete range of LV Cable Accessories  ➡

Cable Breakouts | Cable Caps | Cable Lugs | Cable Cleats | Cable Trough | Cable Duct | Feeder Pillars | for 11kV/33kV/66kV networks see MV HV Joints & Terminations

Pfisterer | Nexans Euromold | Prysmian | Cable Joints & Terminations MV HV

Cold Shrink by 3M | Joints | Abandonment | Terminations | Low Voltage LV Cables